E2E-X5MF1-R 2M Equivalent & Substitute Parts

Part Overview

The E2E-X5MF1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 5mm sensing distance and delivers PNP-NO output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure ongoing component availability for new installations and field replacements.

Substiute Parts

E2E-X5MF1-R 2M

Omron Automation and SafetyIn Stock: 866E2E-X5MF1-R 2M Datasheet

Current PartRFQ

E2E-X5MB1D12-R 2M

Omron Automation and SafetyIn Stock: 1164E2E-X5MB1D12-R 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X5MB1D12-R 2M qualifies as a direct substitute for the E2E-X5MF1-R 2M based on alignment of critical electrical and mechanical parameters. Substitution compatibility is established through the following matching criteria:

Electrical Parameters:

• Identical sensing distance: 0.197" (5mm)
• Identical output configuration: PNP-NO, 3-Wire
• Identical supply voltage range: 10V ~ 30V
• Identical operating temperature range: -40°C ~ 85°C

Mechanical Parameters:

• Identical package form factor: Cylinder, Threaded - M12
• Identical body material: Nickel-Plated Brass
• Identical ingress protection rating: IP67 (substitute includes additional IP69K rating)

Compliance Parameters:

• Both sensors are RoHS Compliant
• Both sensors feature MSL 1 (Unlimited) moisture sensitivity level

The E2E-X5MB1D12-R 2M represents an active product within the E2E NEXT series, providing enhanced specifications including doubled response frequency (800Hz versus 400Hz) and extended ingress protection certification (IP69K), while maintaining full backward compatibility with the obsolete E2E-X5MF1-R 2M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5MB1D12-R 2M is the designated substitute for the obsolete E2E-X5MF1-R 2M. Selection of this substitute is supported by the following engineering factors:

Product Status Alignment: The substitute part maintains active product status within Omron's current E2E NEXT series, ensuring long-term component availability, ongoing manufacturer support, and access to technical documentation and field service resources.

Compliance Certification: Both the main part and substitute are RoHS Compliant, maintaining regulatory compliance for applications subject to hazardous substance restrictions. The substitute carries ECCN EAR99 classification and HTSUS code 8543.70.9860, confirming export and trade compliance.

Functional Equivalence: Electrical and mechanical parameters are identical across critical specifications: sensing distance, output configuration, supply voltage, operating temperature range, and mechanical form factor. These parameters determine functional interchangeability in circuit design and mechanical installation.

Enhanced Specifications: The substitute provides doubled response frequency (800Hz versus 400Hz) and extended ingress protection (IP69K in addition to IP67), delivering improved performance characteristics without compromising backward compatibility.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MB1D12-R 2M directly replace the E2E-X5MF1-R 2M in existing installations?

A: Yes. Both sensors share identical electrical output characteristics (PNP-NO, 3-Wire), supply voltage range (10V ~ 30V), sensing distance (5mm), and M12 threaded mechanical form factor. No circuit modifications are required for substitution.

Q: What is the primary difference between these two sensors?

A: The E2E-X5MB1D12-R 2M operates at 800Hz response frequency compared to 400Hz for the E2E-X5MF1-R 2M, enabling faster detection cycles. The substitute also provides IP69K ingress protection in addition to IP67, extending environmental durability. Termination style differs: the main part uses wire leads while the substitute uses cable leads.

Q: Are there any compatibility concerns with the M12 threaded connector?

A: No. Both sensors utilize identical M12 threaded cylinder packaging, ensuring mechanical compatibility with existing M12 mounting fixtures and connector interfaces.

Q: Does the substitute maintain the same operating temperature range?

A: Yes. Both sensors operate across the identical temperature range of -40°C to 85°C, ensuring thermal compatibility in applications with equivalent environmental specifications.

Q: What is the significance of the cable leads termination in the substitute?

A: The E2E-X5MB1D12-R 2M uses cable leads rather than wire leads, providing enhanced mechanical durability and strain relief in applications subject to vibration or frequent connector cycling. This represents an improvement over the wire lead configuration of the obsolete part.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E-X5MF1-R 2M and E2E-X5MB1D12-R 2M are RoHS Compliant, meeting hazardous substance restrictions for regulated markets and applications.

Q: Why is the main part classified as obsolete?

A: The E2E-X5MF1-R 2M is obsolete due to product lifecycle discontinuation by Omron Automation and Safety. The E2E-X5MB1D12-R 2M represents the active successor within the E2E NEXT series, providing equivalent functionality with enhanced performance specifications.