Omron E2E-X5MF1-M1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E-X5MF1-M1 is an inductive proximity sensor with a 5mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor features PNP-NO output configuration, operates across a 10V to 40V supply range, and is housed in a threaded M12 cylindrical package with IP67 ingress protection.

The E2E-X5MF1-M1 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain system continuity and ensure availability for replacement, repair, or new installations where this legacy model is specified.

Substiute Parts

E2E-X5MF1-M1

Omron Automation and SafetyIn Stock: 997E2E-X5MF1-M1 Datasheet

Current PartRFQ

E2E-X2MB28-M1

Omron Automation and SafetyIn Stock: 851E2E-X2MB28-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X5MF1-M1 is evaluated based on the following critical parameters:

• Sensor Type: Inductive technology must be maintained for functional equivalence
• Output Configuration: PNP logic and 3-wire connection are required for circuit compatibility
• Voltage Supply Range: The substitute must operate within or encompass the 10V to 40V range
• Operating Temperature Range: Must support -40°C to 85°C minimum
• Ingress Protection: IP67 minimum rating required for environmental sealing
• Termination Style: Connector-based termination for field replaceability
• RoHS Compliance: Required for regulatory and procurement alignment

The E2E-X2MB28-M1 is identified as a substitute part. While this part operates at a reduced sensing distance (2mm versus 5mm) and uses an M8 connector package instead of M12, it maintains core functional compatibility through inductive sensing technology, PNP output logic, 3-wire configuration, overlapping voltage supply range (10V to 30V), matching operating temperature range, IP67+ ingress protection, connector termination, and RoHS compliance.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The E2E-X5MF1-M1 is obsolete, making the active-status E2E-X2MB28-M1 the appropriate forward-looking selection for new designs and long-term availability assurance.

Compliance Alignment: Both parts maintain RoHS compliance and equivalent regulatory certifications (ECCN: EAR99; HTSUS: 8543.70.9860), supporting procurement and supply chain continuity.

Functional Continuity: The E2E-X2MB28-M1 preserves inductive sensing technology, PNP output logic, 3-wire connectivity, and connector-based termination, ensuring circuit-level compatibility in most applications.

Application-Specific Factors: Selection between these parts depends on specific installation requirements regarding sensing distance (5mm versus 2mm), connector size (M12 versus M8), and output logic polarity (NO versus NC). The reduced sensing distance and higher response frequency of the E2E-X2MB28-M1 may require application validation.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2MB28-M1 directly replace the E2E-X5MF1-M1 in all applications?

A: Direct replacement requires verification of two critical factors: (1) sensing distance compatibility—the E2E-X2MB28-M1 operates at 2mm versus the original 5mm, requiring closer object proximity; (2) output logic—the E2E-X2MB28-M1 uses PNP-NC (normally closed) versus the original PNP-NO (normally open), necessitating circuit logic review.

Q: What are the key differences in connector packages?

A: The E2E-X5MF1-M1 uses an M12 threaded cylindrical connector, while the E2E-X2MB28-M1 uses an M8 threaded connector. These are mechanically incompatible and require different mounting hardware and cable assemblies.

Q: Are both parts suitable for the same voltage supply?

A: The E2E-X5MF1-M1 operates at 10V to 40V, while the E2E-X2MB28-M1 operates at 10V to 30V. The E2E-X2MB28-M1 cannot be used in applications requiring supply voltages above 30V.

Q: What is the significance of the response frequency difference?

A: The E2E-X2MB28-M1 has a 1kHz response frequency compared to the E2E-X5MF1-M1's 400Hz. This higher frequency enables faster detection cycles and is suitable for higher-speed automation processes.

Q: Do both sensors offer equivalent environmental protection?

A: Both sensors meet IP67 ingress protection. The E2E-X2MB28-M1 additionally supports IP69K, providing enhanced protection in high-pressure wash and harsh environmental applications.

Q: What material differences exist between the two sensors?

A: The E2E-X5MF1-M1 uses nickel-plated brass, while the E2E-X2MB28-M1 uses stainless steel. Stainless steel offers superior corrosion resistance in chemically aggressive or marine environments.