E2E-X5ME1-R 2M Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The E2E-X5ME1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection of metallic objects at a 5mm sensing distance. This sensor operates with NPN-NO output configuration in a compact M12 threaded cylinder package. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in active applications.

Substiute Parts

E2E-X5ME1-R 2M

Omron Automation and SafetyIn Stock: 1195E2E-X5ME1-R 2M Datasheet

Current PartRFQ

E2E-X5MC112-R 2M

Omron Automation and SafetyIn Stock: 1252E2E-X5MC112-R 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X5ME1-R 2M is determined by the following critical parameters that must remain consistent:

• Sensor Type: Inductive
• Sensing Distance: 0.197" (5mm)
• Output Type: NPN-NO, 3-Wire
• Package / Case: Cylinder, Threaded - M12
• Ingress Protection: IP67 minimum
• Operating Temperature Range: -40°C ~ 85°C
• Voltage Supply Range: Overlapping operational window

The E2E-X5MC112-R 2M qualifies as a direct substitute based on matching all critical parameters. This part belongs to the E2E NEXT series, representing an active product line evolution within the same base product family (E2E-X5).

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5MC112-R 2M is the designated substitute for the obsolete E2E-X5ME1-R 2M. Both parts maintain identical mechanical and electrical compatibility for the core sensing function. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

Key considerations for selection:

The substitute operates within a narrower voltage supply range (10V ~ 30V versus 10V ~ 40V). Verify that your system supply voltage does not exceed 30V DC.

The substitute features doubled response frequency (800Hz versus 400Hz), providing faster detection capability without compromising compatibility in standard applications.

The substitute offers enhanced ingress protection certification (IP67 and IP69K), providing superior environmental sealing compared to the original IP67 rating.

Both parts maintain identical operating temperature range, material composition, and M12 threaded cylinder package configuration, ensuring direct mechanical and thermal compatibility.

Both parts carry RoHS Compliance certification, meeting regulatory requirements for hazardous substance restrictions.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MC112-R 2M directly replace the E2E-X5ME1-R 2M in existing installations?

A: Yes. Both sensors share identical sensing distance (5mm), output type (NPN-NO, 3-Wire), operating temperature range (-40°C ~ 85°C), and M12 threaded cylinder package. Mechanical and electrical compatibility is maintained. Verify that your system supply voltage operates within the 10V ~ 30V range required by the substitute.

Q: What is the difference in response frequency between these two sensors?

A: The original E2E-X5ME1-R 2M operates at 400Hz response frequency, while the substitute E2E-X5MC112-R 2M operates at 800Hz. The higher frequency in the substitute enables faster detection cycles. This difference does not affect compatibility in standard industrial applications.

Q: Why does the substitute have a lower maximum supply voltage?

A: The E2E-X5MC112-R 2M operates within the 10V ~ 30V range, compared to the original 10V ~ 40V range. This reflects design improvements in the E2E NEXT series. Ensure your system supply voltage does not exceed 30V DC before implementing the substitute.

Q: Are both sensors IP67 rated?

A: The original E2E-X5ME1-R 2M carries IP67 rating. The substitute E2E-X5MC112-R 2M carries both IP67 and IP69K ratings, providing enhanced environmental protection. This represents an improvement in ingress protection capability.

Q: What is the difference between the E2E and E2E NEXT series?

A: Both sensors share the same base product number (E2E-X5) and core functionality. The E2E NEXT series represents an active product line evolution with enhanced specifications, including higher response frequency and improved ingress protection ratings.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X5ME1-R 2M and E2E-X5MC112-R 2M carry RoHS Compliance certification, meeting regulatory requirements for hazardous substance restrictions in electronic components.

Q: Why is the original part listed as obsolete?

A: The E2E-X5ME1-R 2M has been discontinued by Omron Automation and Safety. The E2E-X5MC112-R 2M represents the active equivalent within the current product portfolio, ensuring continued availability and support.