E2E-X5F2 2M Equivalent & Substitute Parts

Part Overview

The E2E-X5F2 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 5mm (0.197") sensing distance and delivers PNP-NC output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new installations and maintenance applications.

Substiute Parts

E2E-X5F2 2M

Omron Automation and SafetyIn Stock: 1129E2E-X5F2 2M Datasheet

Current PartRFQ

E2E-X5B218 2M

Omron Automation and SafetyIn Stock: 865E2E-X5B218 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X5B218 2M qualifies as a direct substitute for the E2E-X5F2 2M based on alignment across all critical electrical and mechanical parameters. Substitution eligibility is determined by the following parameters:

Electrical Compatibility:

• Identical sensor type (Inductive)
• Matching sensing distance (0.197" / 5mm)
• Identical output configuration (PNP-NC, 3-Wire)
• Matching response frequency (600Hz)
• Identical supply voltage range (10V ~ 30V)

Mechanical Compatibility:

• Identical shielding specification (Shielded)
• Matching body material (Nickel-Plated Brass)
• Identical package form factor (Cylinder, Threaded - M18)
• Identical operating temperature range (-40°C ~ 85°C)
• Matching ingress protection rating (IP67)

Regulatory Compliance:

• Both RoHS Compliant
• Both MSL 1 (Unlimited)

The primary distinction between the main part and substitute is product status: the E2E-X5F2 2M is obsolete, while the E2E-X5B218 2M is active. The substitute belongs to the E2E NEXT series, representing the current generation of this product line.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5B218 2M is the appropriate selection for applications currently specified with the E2E-X5F2 2M. The substitute part maintains full electrical and mechanical compatibility across all critical parameters while offering the advantage of active product status and current manufacturing support.

The E2E-X5B218 2M provides enhanced ingress protection with IP69K rating in addition to the IP67 specification, offering extended environmental durability without compromising the core functional requirements. Both parts are RoHS Compliant and carry MSL 1 classification, ensuring regulatory alignment and unlimited moisture sensitivity tolerance.

The transition from wire leads (E2E-X5F2 2M) to cable leads (E2E-X5B218 2M) represents a packaging evolution within the product line. This change does not affect electrical performance or sensing characteristics and aligns with current manufacturing standards for the E2E NEXT series.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5B218 2M directly replace the E2E-X5F2 2M in existing installations?

A: Yes. Both sensors share identical electrical specifications (PNP-NC output, 600Hz response frequency, 10V ~ 30V supply voltage) and mechanical form factors (M18 threaded cylinder, 5mm sensing distance). The substitution is electrically and mechanically compatible.

Q: What is the difference between wire leads and cable leads termination?

A: Wire leads (E2E-X5F2 2M) consist of individual stranded conductors extending from the sensor body. Cable leads (E2E-X5B218 2M) integrate these conductors within a unified cable jacket. Both termination styles deliver identical electrical performance; the selection depends on installation methodology and connector interface requirements.

Q: Does the E2E-X5B218 2M offer any performance improvements over the E2E-X5F2 2M?

A: Both sensors deliver identical sensing distance (5mm), response frequency (600Hz), and output characteristics. The E2E-X5B218 2M provides enhanced ingress protection with IP69K rating, extending environmental durability beyond the IP67 specification of the original part.

Q: Are both parts RoHS Compliant?

A: Yes. Both the E2E-X5F2 2M and E2E-X5B218 2M are RoHS Compliant and carry MSL 1 (Unlimited) classification, ensuring regulatory alignment for industrial applications.

Q: Why is the E2E-X5F2 2M classified as obsolete?

A: The E2E-X5F2 2M has been superseded by the E2E-X5B218 2M within the E2E NEXT product series. The newer model maintains full functional compatibility while incorporating current manufacturing standards and enhanced environmental specifications.

Q: What is the supply voltage range for both sensors?

A: Both the E2E-X5F2 2M and E2E-X5B218 2M operate within a 10V ~ 30V supply voltage range, providing compatibility with standard industrial control systems and power supplies.

Q: Are the operating temperature ranges identical?

A: Yes. Both sensors operate across the -40°C ~ 85°C temperature range, ensuring performance consistency across standard industrial environmental conditions.