Equivalent & Substitute Parts: E2E-X5F1-R 2M

Part Overview

The E2E-X5F1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 5mm sensing distance and delivers PNP-NO output in a compact M18 threaded cylinder form factor. The product is classified as obsolete, necessitating identification of active equivalent alternatives to maintain system continuity and ensure long-term component availability for new installations and field replacements.

Substiute Parts

E2E-X5F1-R 2M

Omron Automation and SafetyIn Stock: 986E2E-X5F1-R 2M Datasheet

Current PartRFQ

E2E-X5B1D18-R 2M

Omron Automation and SafetyIn Stock: 1112E2E-X5B1D18-R 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X5B1D18-R 2M qualifies as a direct substitute for the E2E-X5F1-R 2M based on alignment across all critical electrical and mechanical parameters that define functional compatibility in inductive proximity sensor applications.

Substitution Criteria Met:

• Sensor Type: Both sensors are inductive, providing identical detection methodology
• Sensing Distance: Both operate at 0.197" (5mm), ensuring equivalent detection range
• Output Configuration: Both deliver PNP-NO output on 3-wire architecture, maintaining signal compatibility with existing control circuits
• Response Frequency: Both operate at 600Hz, supporting identical switching speeds
• Supply Voltage: Both accept 10V ~ 30V input, compatible with standard industrial power supplies
• Operating Temperature: Both function across -40°C ~ 85°C, meeting identical environmental requirements
• Ingress Protection: Both meet IP67 minimum specification, suitable for wet and dusty environments
• Package Form Factor: Both utilize M18 threaded cylinder housing, enabling direct mechanical installation
• Shielding: Both employ shielded construction, providing equivalent electromagnetic interference rejection
• Body Material: Both feature nickel-plated brass construction, offering identical corrosion resistance
• RoHS Compliance: Both are RoHS compliant, meeting regulatory requirements

The primary distinction between these sensors is product status and termination style, with the substitute part representing the active generation within the E2E NEXT series.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5B1D18-R 2M is the appropriate substitute for the obsolete E2E-X5F1-R 2M based on the following engineering factors:

Product Status: The E2E-X5B1D18-R 2M carries active product status within the E2E NEXT series, ensuring ongoing manufacturer support, availability, and compliance with current regulatory standards. The main part is classified as obsolete, creating supply chain risk and limiting access to technical support.

Regulatory Compliance: Both sensors maintain RoHS compliance. The substitute part carries EAR99 ECCN classification and defined HTSUS coding, providing clear regulatory documentation for procurement and export compliance.

Enhanced Environmental Rating: The substitute part achieves IP69K in addition to IP67, providing superior protection in high-pressure wash and submersion applications while maintaining full backward compatibility with IP67 requirements.

Functional Equivalence: All critical electrical parameters—sensing distance, output type, response frequency, supply voltage, and operating temperature range—are identical between the main part and substitute, ensuring direct functional replacement without circuit modification.

Mechanical Compatibility: Both sensors utilize identical M18 threaded cylinder packaging, supporting direct mechanical installation in existing mounting fixtures.

Termination Consideration: The substitute part features cable leads rather than wire leads. Integration into existing harnesses requires appropriate connector selection or lead adaptation based on the specific installation configuration.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5B1D18-R 2M directly replace the E2E-X5F1-R 2M in existing installations?

A: Yes, the E2E-X5B1D18-R 2M provides direct functional replacement. All electrical parameters—sensing distance, output type, response frequency, supply voltage, and operating temperature—are identical. Mechanical installation is compatible due to matching M18 threaded cylinder form factor. Termination style differs (cable leads versus wire leads), requiring appropriate connector or lead adaptation based on the specific harness configuration.

Q: What is the significance of the IP69K rating on the substitute part?

A: The E2E-X5B1D18-R 2M achieves both IP67 and IP69K ratings, exceeding the IP67 specification of the main part. IP69K provides protection against high-pressure water jets and steam cleaning, making the substitute suitable for more demanding environmental conditions while remaining fully compatible with standard IP67 applications.

Q: Are there any electrical circuit modifications required when substituting the E2E-X5B1D18-R 2M?

A: No electrical circuit modifications are required. Both sensors deliver identical PNP-NO output on 3-wire configuration with matching response frequency and voltage supply range. The substitute integrates directly into existing control circuits without signal conditioning or logic changes.

Q: How does the cable lead termination of the substitute part affect installation?

A: The substitute part uses cable leads instead of wire leads. This requires connector selection appropriate to the installation harness. If the original installation uses direct wire connections, a connector interface or lead splicing may be necessary. If the original installation uses connectors, the substitute part may integrate more directly depending on connector type compatibility.

Q: Is the E2E-X5B1D18-R 2M available in the same packaging format?

A: The substitute part is supplied in box packaging rather than the original packaging format. Both sensors use identical M18 threaded cylinder mechanical packaging, ensuring compatibility with mounting fixtures and installation procedures.

Q: What is the base product number relationship between these sensors?

A: The E2E-X5B1D18-R 2M carries base product number E2E-X5, indicating membership in the E2E NEXT series. The main part belongs to the E2E series. Both share the same 5mm sensing distance and M18 form factor within the Omron inductive proximity sensor product family.

Q: Are both sensors RoHS compliant?

A: Yes, both the E2E-X5F1-R 2M and E2E-X5B1D18-R 2M are RoHS compliant, meeting regulatory requirements for hazardous substance restrictions in electrical and electronic equipment.