E2E-X5F1 2M Equivalent & Substitute Parts

Part Overview

The E2E-X5F1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 5mm (0.197") sensing distance and delivers PNP-NO output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure ongoing component availability for new installations and field replacements.

Substiute Parts

E2E-X5F1 2M

Omron Automation and SafetyIn Stock: 1076E2E-X5F1 2M Datasheet

Current PartRFQ

E2E-X5B1D18 2M

Omron Automation and SafetyIn Stock: 1108E2E-X5B1D18 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X5F1 2M is based on functional and mechanical equivalence across the following critical parameters:

Electrical Compatibility:

• Identical sensor type (Inductive)
• Matching sensing distance (0.197" / 5mm)
• Identical output configuration (PNP-NO, 3-Wire)
• Matching response frequency (600Hz)
• Identical supply voltage range (10V ~ 30V)

Environmental & Mechanical Compatibility:

• Matching operating temperature range (-40°C ~ 85°C)
• Identical ingress protection rating (IP67)
• Identical package form factor (Cylinder, Threaded - M18)
• Identical body material (Nickel-Plated Brass)
• Matching shielding configuration (Shielded)

Regulatory Compliance:

• RoHS Compliant status maintained

The E2E-X5B1D18 2M qualifies as a direct substitute based on full alignment with these parameters. The primary distinction lies in product status (active versus obsolete) and termination style variation (cable leads versus wire leads), which does not affect functional substitution in applications where termination method can be adapted.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5B1D18 2M is the designated substitute for the obsolete E2E-X5F1 2M. Selection of this substitute is supported by the following engineering factors:

Product Status & Availability: The E2E-X5B1D18 2M carries active product status with confirmed inventory availability (1026 Pcs), ensuring reliable procurement for both new designs and field replacement applications. The E2E-X5F1 2M, classified as obsolete, presents supply chain risk and should be transitioned to the active equivalent.

Functional Equivalence: All critical electrical parameters—sensor type, sensing distance, output configuration, response frequency, and supply voltage—are identical between the two models. This ensures drop-in functional compatibility within existing circuit designs and control logic.

Environmental & Mechanical Compatibility: Operating temperature range, ingress protection rating, mechanical form factor, and material composition are fully matched. The E2E-X5B1D18 2M additionally provides IP69K rating, offering enhanced protection in high-pressure wash environments without compromising the base IP67 specification.

Regulatory Compliance: Both models maintain RoHS Compliant status, satisfying regulatory requirements for hazardous substance restrictions.

Series Evolution: The E2E-X5B1D18 2M represents the next-generation E2E NEXT series, providing access to current manufacturing processes and quality standards while maintaining backward compatibility with the legacy E2E series.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5B1D18 2M directly replace the E2E-X5F1 2M in existing installations?

A: Yes. All electrical parameters, environmental ratings, and mechanical specifications are identical. The primary difference is termination style (cable leads versus wire leads). If the existing installation uses wire leads, termination adaptation may be required.

Q: What is the significance of the IP69K rating on the E2E-X5B1D18 2M?

A: The E2E-X5B1D18 2M provides both IP67 and IP69K ratings. IP69K represents enhanced protection against high-pressure water jets and steam cleaning. This is a superset of the IP67 specification and does not affect compatibility with applications requiring only IP67 protection.

Q: Are there differences in sensing performance between these two models?

A: No. Both models share identical sensing distance (5mm), response frequency (600Hz), sensor type (inductive), and output configuration (PNP-NO, 3-Wire). Sensing performance is equivalent.

Q: Why is the E2E-X5F1 2M classified as obsolete?

A: Product obsolescence reflects Omron's transition to the E2E NEXT series. The E2E-X5B1D18 2M represents the current-generation equivalent, offering improved manufacturing standards and extended product lifecycle support.

Q: What is the difference between wire leads and cable leads termination?

A: Wire leads consist of individual stranded conductors extending from the sensor body. Cable leads integrate these conductors within a unified cable assembly. Both provide identical electrical function; selection depends on installation method and connector requirements.

Q: Are both models RoHS compliant?

A: Yes. Both the E2E-X5F1 2M and E2E-X5B1D18 2M maintain RoHS Compliant status, satisfying hazardous substance restriction requirements.

Q: What is the operating temperature range for both sensors?

A: Both models operate across the identical temperature range of -40°C to 85°C, ensuring compatibility across industrial environments.

Q: Can the E2E-X5B1D18 2M be used in applications requiring IP67 protection?

A: Yes. The E2E-X5B1D18 2M meets and exceeds IP67 requirements. Its additional IP69K rating provides enhanced protection without compromising IP67 compatibility.