Omron E2E-X5E2 5M Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E-X5E2 5M is an inductive proximity sensor designed for industrial automation applications. This sensor detects ferrous metal objects within a 5mm sensing distance and outputs a signal via a 3-wire NPN-NC configuration. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in ongoing production environments.

Substiute Parts

E2E-X5E2 5M

Omron Automation and SafetyIn Stock: 1102E2E-X5E2 5M Datasheet

Current PartRFQ

E2E-X5C218 5M

Omron Automation and SafetyIn Stock: 1069E2E-X5C218 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X5C218 5M qualifies as a functional substitute based on the following critical parameters:

Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.197" (5mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 600Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 (with additional IP69K rating)
• Indicator: LED
• Package / Case: Cylinder, Threaded - M18
• Base Product Number: E2E-X5
• RoHS Status: RoHS Compliant

Allowable Variation:

• Voltage - Supply: E2E-X5E2 5M operates at 10V ~ 40V; E2E-X5C218 5M operates at 10V ~ 30V. The substitute has a narrower voltage range but remains compatible with standard industrial 24V DC supply systems.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5C218 5M is the designated substitute for the obsolete E2E-X5E2 5M. Both sensors share identical functional specifications across all critical parameters: inductive sensing principle, 5mm detection range, NPN-NC output configuration, 600Hz response frequency, M18 threaded housing, and operating temperature range.

The E2E-X5C218 5M is currently in active production status, ensuring long-term availability and supply chain continuity. Both parts maintain RoHS compliance and equivalent environmental protection ratings (IP67 minimum). The substitute offers an enhanced ingress protection rating (IP69K) at no functional cost.

The sole parameter variance is the supply voltage range. The substitute operates within 10V ~ 30V, compared to the original part's 10V ~ 40V specification. This narrower range remains fully compatible with standard industrial 24V DC power systems and does not restrict application in typical automation environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5C218 5M directly replace the E2E-X5E2 5M in existing installations?

A: Yes. Both sensors share identical mechanical mounting (M18 threaded cylinder), electrical output configuration (NPN-NC, 3-wire), and sensing characteristics (5mm inductive detection). No circuit modifications or mechanical rework are required for direct substitution.

Q: What is the significance of the voltage range difference?

A: The E2E-X5E2 5M operates at 10V ~ 40V, while the E2E-X5C218 5M operates at 10V ~ 30V. Standard industrial automation systems use 24V DC power supplies, which fall within both ranges. The narrower range of the substitute does not impact compatibility in conventional applications. Applications requiring supply voltages above 30V would require circuit evaluation.

Q: Why is the original E2E-X5E2 5M classified as obsolete?

A: The E2E-X5E2 5M has been discontinued by Omron Automation and Safety. The E2E-X5C218 5M represents the current-generation equivalent from the E2E NEXT series, offering identical functionality with enhanced environmental protection ratings and active production support.

Q: Are there any differences in mechanical installation between these two sensors?

A: No. Both sensors use identical M18 threaded cylinder packaging with cable lead termination. Installation procedures, mounting hardware, and connector specifications remain unchanged.

Q: Does the E2E-X5C218 5M offer any performance advantages over the original part?

A: The E2E-X5C218 5M maintains all original performance specifications (600Hz response frequency, 5mm sensing distance, NPN-NC output) and adds an enhanced ingress protection rating (IP69K in addition to IP67). This provides improved environmental sealing without any performance trade-offs.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X5E2 5M and E2E-X5C218 5M are RoHS compliant, meeting environmental and regulatory requirements for industrial component use.