E2E-X4MD2-US 2M Equivalent & Substitute Parts

Part Overview

The E2E-X4MD2-US 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, classified as a SENSOR PROX within the Sensors, Transducers category. This part is currently listed with Obsolete product status. The E2E-X4MD2-US 2M has been superseded by active production alternatives that maintain functional and mechanical compatibility. Identifying equivalent substitute parts is necessary to ensure continued availability, support, and compliance with current component sourcing requirements.

Substiute Parts

E2E-X4MD2-US 2M

Omron Automation and SafetyIn Stock: 1009E2E-X4MD2-US 2M Datasheet

Current PartRFQ

E2E-X4MD2 2M

Omron Automation and SafetyIn Stock: 697E2E-X4MD2 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X4MD2-US 2M is substituted by the E2E-X4MD2 2M based on the following substitution criteria:

Manufacturer Continuity: Both parts are manufactured by Omron Automation and Safety, ensuring consistent design standards and quality control.

Series Alignment: Both parts belong to the E2E series, confirming functional and mechanical compatibility within the same product family.

Base Product Number Match: The substitute part shares the identical base product number (E2E-X4MD2), indicating that the core sensor design, sensing technology, and mechanical form factor are equivalent.

Functional Classification: Both parts are classified as inductive proximity sensors with identical sensing distance (0.157" / 4mm), output type (NC, 2-Wire), and electrical specifications.

Mechanical Compatibility: Both parts feature identical package configuration (Cylinder, Threaded - M8), ensuring direct mechanical interchangeability in existing installations.

Environmental Specifications: Both parts maintain identical ingress protection rating (IP67), operating temperature range (-25°C ~ 70°C), and material composition (Stainless Steel body).

Electrical Specifications: Both parts operate within the same voltage supply range (10V ~ 30V) and response frequency (1kHz), confirming electrical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X4MD2 2M is the direct substitute for the obsolete E2E-X4MD2-US 2M. Selection of the active substitute part is based on the following engineering criteria:

Product Status Compliance: The E2E-X4MD2 2M maintains Active product status with full manufacturer support, ensuring long-term availability and continued technical documentation updates. The obsolete status of the E2E-X4MD2-US 2M indicates discontinued production and limited future availability.

Functional Equivalence: All electrical, mechanical, and environmental parameters are identical between the two parts. The substitute part performs the identical inductive proximity sensing function with no modification to circuit design or mechanical installation requirements.

Manufacturer Support: Both parts are manufactured by Omron Automation and Safety under the same E2E series designation, ensuring consistent quality standards and interchangeability within the product family.

Inventory Availability: The E2E-X4MD2 2M is currently in active production with 646 units in stock, providing reliable sourcing compared to the limited remaining inventory of the obsolete variant.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X4MD2 2M be used as a direct replacement for the E2E-X4MD2-US 2M?

A: Yes. The E2E-X4MD2 2M is a direct substitute with identical electrical specifications (10V ~ 30V supply, 1kHz response frequency, NC 2-Wire output), mechanical configuration (Cylinder, Threaded - M8 package), and environmental ratings (IP67, -25°C ~ 70°C operating range). No circuit modifications or mechanical adaptations are required.

Q: What is the difference between the E2E-X4MD2-US 2M and E2E-X4MD2 2M?

A: The primary difference is product status. The E2E-X4MD2-US 2M is Obsolete, while the E2E-X4MD2 2M is Active. All functional and mechanical parameters are identical. The designation change reflects manufacturer production status rather than technical capability changes.

Q: Are there any compatibility concerns when substituting the E2E-X4MD2 2M for the E2E-X4MD2-US 2M?

A: No compatibility concerns exist. Both parts share identical sensing distance (0.157" / 4mm), output type (NC, 2-Wire), termination style (Cable Leads), and mechanical form factor. Installation and electrical connection procedures remain unchanged.

Q: What is the sensing distance for these inductive proximity sensors?

A: The sensing distance is 0.157 inches, equivalent to 4 millimeters. This specification is identical for both the obsolete and active variants.

Q: What is the ingress protection rating for the E2E-X4MD2 2M?

A: The ingress protection rating is IP67, indicating complete dust protection and temporary immersion capability up to 1 meter for 30 minutes. This rating applies to both the obsolete and active variants.

Q: What supply voltage range is required for operation?

A: Both parts operate within a supply voltage range of 10V to 30V DC. This wide voltage range accommodates various industrial control system configurations.

Q: What is the operating temperature range?

A: The operating temperature range is -25°C to 70°C for both the obsolete and active variants, suitable for standard industrial environments.

Q: What type of termination is used?

A: Both parts feature Cable Leads termination style, providing direct connection to control circuits without requiring additional connectors or adapters.

Q: Is shielding present on these sensors?

A: No. Both parts are classified as Unshielded inductive proximity sensors. Shielding status should be considered when selecting mounting locations relative to ferrous materials.