Request Quote
(Ships tomorrow)
E2E-X3D2-US 2M Equivalent & Substitute Parts
Part Overview
The E2E-X3D2-US 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, classified as a proximity sensor within the transducer category. This part is currently listed with Obsolete product status. Due to its obsolete classification, locating equivalent or substitute components is necessary for system maintenance, repair, and new design implementations where this sensor type is required.
Substiute Parts
Key Parameters
| Parameter | E2E-X3D2-US 2M |
|---|---|
| Manufacturer | Omron Automation and Safety |
| Product Category | Proximity Sensor |
| Product Status | Obsolete |
| Base Product Number | E2E-X3D2 |
| Series | E2E |
| Moisture Sensitivity Level | Not Applicable |
| Current Inventory | 808 Pcs New Original In Stock |
Substitute Part Grouping Explanation
The E2E-X3D2-N 2M is identified as the manufacturer-recommended substitute for the E2E-X3D2-US 2M. This substitution is based on the following criteria:
Substitution Basis:
- Same base product family (E2E-X3D2 series)
- Same manufacturer (Omron Automation and Safety)
- Active product status (versus obsolete status of original part)
- Identical sensor type classification (Inductive Proximity Sensor)
- Compatible mechanical form factor (Cylinder, Threaded - M12)
- Matching electrical output characteristics (NC, 2-Wire configuration)
The substitute part maintains functional equivalence through alignment of core sensor parameters including sensing distance, output type, response frequency, shielding, supply voltage range, operating temperature range, and ingress protection rating.
Parameter Comparison
| Parameter | E2E-X3D2-US 2M | E2E-X3D2-N 2M |
|---|---|---|
| Manufacturer | Omron Automation and Safety | Omron Automation and Safety |
| Series | E2E | E2E |
| Sensor Type | Inductive Proximity Sensor | Inductive Proximity Sensor |
| Sensing Distance | 0.118" (3mm) | 0.118" (3mm) |
| Output Type | NC, 2-Wire | NC, 2-Wire |
| Response Frequency | 1kHz | 1kHz |
| Shielding | Shielded | Shielded |
| Material - Body | Nickel-Plated Brass | Nickel-Plated Brass |
| Voltage - Supply | 12V ~ 30V | 12V ~ 30V |
| Termination Style | Cable Leads | Cable Leads |
| Operating Temperature | -25°C ~ 70°C | -25°C ~ 70°C |
| Ingress Protection | IP67 | IP67 |
| Package / Case | Cylinder, Threaded - M12 | Cylinder, Threaded - M12 |
| Indicator | LED | LED |
| Product Status | Obsolete | Active |
| Current Inventory | 808 Pcs New Original In Stock | 945 Pcs New Original In Stock |
Engineering Selection Recommendations
The E2E-X3D2-N 2M is the manufacturer-recommended equivalent for the obsolete E2E-X3D2-US 2M. Selection of the substitute part is based on:
Product Status Compliance: The E2E-X3D2-N 2M maintains Active product status, ensuring continued manufacturer support, availability, and compliance with current production standards.
Functional Equivalence: All electrical and mechanical parameters are identical between the original and substitute parts, including sensor type, sensing distance, output configuration, voltage supply range, operating temperature range, and environmental protection rating.
Mechanical Compatibility: Both parts share identical mechanical specifications, including M12 threaded cylinder form factor and cable lead termination, enabling direct installation in existing mounting configurations.
Inventory Availability: The substitute part is available in higher quantity (945 Pcs) compared to the original part (808 Pcs), supporting both immediate and future procurement requirements.
Frequently Asked Questions (FAQ)
Q: Can the E2E-X3D2-N 2M be used as a direct replacement for the E2E-X3D2-US 2M?
A: Yes. The E2E-X3D2-N 2M is the manufacturer-recommended substitute. All electrical parameters, mechanical dimensions, and functional specifications are identical, enabling direct substitution without circuit or mounting modifications.
Q: What is the primary reason for substitution?
A: The E2E-X3D2-US 2M is classified as Obsolete. The E2E-X3D2-N 2M is an Active product, ensuring continued availability and manufacturer support.
Q: Are the sensing distances identical?
A: Yes. Both parts operate at 0.118" (3mm) sensing distance.
Q: Is the output configuration the same?
A: Yes. Both parts feature NC (Normally Closed), 2-Wire output configuration with 1kHz response frequency.
Q: Are the supply voltage requirements compatible?
A: Yes. Both parts operate within the 12V ~ 30V supply voltage range.
Q: Do both parts have the same operating temperature range?
A: Yes. Both parts operate across -25°C ~ 70°C.
Q: Is the mechanical form factor identical?
A: Yes. Both parts use Cylinder, Threaded - M12 package configuration with Cable Leads termination.
Q: What is the ingress protection rating?
A: Both parts are rated IP67, providing protection against dust and temporary immersion in water.
Q: Are there any differences in body material?
A: No. Both parts feature Nickel-Plated Brass body construction.
Q: Is shielding present on both parts?
A: Yes. Both parts are Shielded inductive proximity sensors.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts