E2E-X2MY2 5M Equivalent & Substitute Parts

Part Overview

The Omron E2E-X2MY2 5M is an inductive proximity sensor with a 2mm sensing distance, designed for cylindrical M8 threaded mounting applications. This sensor operates across a wide AC voltage range (20 VAC ~ 264 VAC) and provides normally closed (NC) 2-wire output with LED indication. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system functionality and ensure continued availability for replacement and new installations.

Substiute Parts

E2E-X2MY2 5M

Omron Automation and SafetyIn Stock: 1164E2E-X2MY2 5M Datasheet

Current PartRFQ

E2E-X5MY2 5M

Omron Automation and SafetyIn Stock: 855E2E-X5MY2 5M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X2MY2 5M is determined by compatibility across the following critical parameters:

Maintained Compatibility Parameters:

• Sensor Type: Inductive
• Output Type: NC, 2-Wire
• Response Frequency: 25Hz
• Shielding: Unshielded
• Voltage - Supply: 20 VAC ~ 264 VAC
• Termination Style: Cable Leads
• Operating Temperature: -25°C ~ 70°C
• Ingress Protection: IP67
• Indicator: LED
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parameters Subject to Variation:

• Sensing Distance: 0.079" (2mm) in the original part; substitute parts may feature extended sensing distances
• Material - Body: Stainless Steel in the original part; substitute parts may use alternative materials such as Nickel-Plated Brass
• Package / Case: Cylinder, Threaded - M8 in the original part; substitute parts may use different threaded cylinder sizes (e.g., M12)

The E2E-X5MY2 5M qualifies as a substitute part because it maintains all critical electrical and functional parameters while offering an extended 5mm sensing distance and active product status.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5MY2 5M is the manufacturer-recommended substitute for the obsolete E2E-X2MY2 5M. Both sensors maintain identical electrical specifications, response characteristics, and environmental ratings. The substitute part carries active product status, ensuring long-term availability and supply chain continuity.

Selection of the E2E-X5MY2 5M requires consideration of the following differences:

Sensing Distance: The substitute part provides a 5mm sensing distance compared to the 2mm distance of the original part. Applications requiring detection at greater distances benefit from this extended range. Applications with spatial constraints or requiring precise 2mm detection may require mechanical adjustment or system redesign.

Mechanical Mounting: The substitute part uses M12 threaded cylinder packaging versus M8 in the original part. Mounting hardware and installation fixtures must accommodate the larger M12 form factor.

Body Material: The substitute part features Nickel-Plated Brass construction instead of Stainless Steel. Both materials provide corrosion resistance appropriate for IP67-rated industrial environments. Material selection should align with specific environmental exposure and chemical compatibility requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MY2 5M directly replace the E2E-X2MY2 5M without modification?

A: Direct replacement is possible if the application tolerates the extended 5mm sensing distance and the M12 threaded mounting form factor. Mechanical mounting fixtures and detection positioning must be evaluated for compatibility with the larger cylinder size.

Q: What is the primary reason for substitution?

A: The E2E-X2MY2 5M is classified as obsolete. The E2E-X5MY2 5M is the manufacturer-recommended active equivalent, ensuring continued availability and supply chain support.

Q: Are the electrical specifications identical between the two parts?

A: Yes. Both sensors operate across 20 VAC ~ 264 VAC, provide NC 2-wire output, maintain 25Hz response frequency, and deliver IP67 ingress protection with LED indication. Operating temperature range and moisture sensitivity levels are identical.

Q: How does the change in sensing distance affect system performance?

A: The substitute part detects objects at distances up to 5mm, compared to 2mm for the original part. Applications requiring detection at shorter distances must ensure the target object remains within the 5mm detection range. Applications with greater spacing between sensor and target benefit from the extended range.

Q: What mounting considerations apply to the M12 threaded cylinder?

A: The M12 form factor is larger than the M8 original packaging. Existing M8 mounting holes and fixtures require modification or replacement to accommodate M12 threaded installation. Verify mechanical clearance and mounting hardware compatibility before installation.

Q: Are there environmental or material compatibility differences?

A: The substitute part uses Nickel-Plated Brass instead of Stainless Steel. Both materials provide corrosion resistance suitable for IP67 environments. Specific applications involving aggressive chemical exposure or specialized material requirements should confirm material compatibility.