E2E-X2MY1-R 2M Equivalent & Substitute Parts

Part Overview

The E2E-X2MY1-R 2M is an Omron inductive proximity sensor with a 2mm sensing distance, designed for compact cylindrical applications requiring M8 threaded mounting. This sensor operates on 20 VAC to 264 VAC supply voltage with normally open (NO) 2-wire output configuration and LED indication. The product is currently classified as obsolete, necessitating identification of active equivalent models to maintain system functionality and ensure continued availability for new installations and replacements.

Substiute Parts

E2E-X2MY1-R 2M

Omron Automation and SafetyIn Stock: 1195E2E-X2MY1-R 2M Datasheet

Current PartRFQ

E2E-X5MY1-R 2M

Omron Automation and SafetyIn Stock: 760E2E-X5MY1-R 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X2MY1-R 2M is determined by the following critical parameters that must remain compatible with the original application:

Mandatory Compatibility Parameters:

• Sensor Type: Inductive
• Output Type: NO, 2-Wire
• Response Frequency: 25Hz
• Voltage - Supply: 20 VAC ~ 264 VAC
• Termination Style: Cable Leads
• Operating Temperature: -25°C ~ 70°C
• Ingress Protection: IP67
• Indicator: LED
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameters (Application-Dependent):

• Sensing Distance: May differ based on detection requirements
• Material - Body: May differ based on environmental conditions
• Package / Case: May differ based on mounting constraints

The E2E-X5MY1-R 2M is identified as a manufacturer-recommended substitute. This model maintains all mandatory compatibility parameters while introducing a larger sensing distance (5mm) and different body material (Nickel-Plated Brass) with M12 threaded mounting. Selection between these models depends on specific application geometry and mounting requirements.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2MY1-R 2M is classified as obsolete and no longer supported by the manufacturer. The E2E-X5MY1-R 2M is the manufacturer-recommended active substitute and maintains full electrical and functional compatibility with the original part.

Selection Criteria:

The E2E-X5MY1-R 2M is suitable for applications where:

• The increased sensing distance of 5mm (versus 2mm) is compatible with the detection geometry
• M12 threaded mounting can be accommodated in the mechanical design
• Nickel-Plated Brass body material meets environmental and corrosion requirements

The E2E-X5MY1-R 2M shares identical electrical specifications, output configuration, response frequency, supply voltage range, operating temperature range, ingress protection rating, and termination style with the original E2E-X2MY1-R 2M. Both sensors provide LED indication and operate within the same environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MY1-R 2M directly replace the E2E-X2MY1-R 2M in existing installations?

A: Electrical and functional compatibility is maintained. However, the increased sensing distance (5mm versus 2mm) and different package size (M12 versus M8) require verification that the mechanical mounting and detection geometry of the application can accommodate these differences.

Q: What is the primary difference between these two sensors?

A: The E2E-X5MY1-R 2M has a larger sensing distance (5mm) and uses M12 threaded mounting with Nickel-Plated Brass construction, compared to the 2mm sensing distance and M8 mounting of the E2E-X2MY1-R 2M. All electrical parameters, output type, and operating specifications remain identical.

Q: Are there any supply voltage or output configuration differences?

A: No. Both sensors operate on 20 VAC to 264 VAC supply voltage and provide normally open (NO) 2-wire output configuration. Response frequency, operating temperature range, and ingress protection rating are identical.

Q: What material difference exists between the two sensors?

A: The E2E-X2MY1-R 2M uses Stainless Steel body construction, while the E2E-X5MY1-R 2M uses Nickel-Plated Brass. Material selection should be based on the specific environmental and corrosion requirements of the application.

Q: Is the E2E-X5MY1-R 2M currently available?

A: Yes. The E2E-X5MY1-R 2M is classified as active product status with current inventory availability, whereas the E2E-X2MY1-R 2M is obsolete and no longer manufactured.

Q: Do both sensors provide LED indication?

A: Yes. Both the E2E-X2MY1-R 2M and E2E-X5MY1-R 2M include LED indicators for operational status.

Q: What is the moisture sensitivity level for both sensors?

A: Both sensors have Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.