E2E-X2MY1 2M Equivalent & Substitute Parts

Part Overview

The E2E-X2MY1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety. This cylindrical, threaded M8 sensor operates with a 2mm sensing distance and provides normally open (NO) output in a 2-wire configuration. The device is rated for 20 VAC to 264 VAC supply voltage with IP67 ingress protection and operates across a temperature range of -25°C to 70°C.

The E2E-X2MY1 2M is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality and ensure continued availability for replacement or new installations where this sensing distance and form factor are required.

Substiute Parts

E2E-X2MY1 2M

Omron Automation and SafetyIn Stock: 811E2E-X2MY1 2M Datasheet

Current PartRFQ

E2E-X5MY1 2M

Omron Automation and SafetyIn Stock: 836E2E-X5MY1 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X2MY1 2M is based on compatibility across the following critical parameters:

Maintained Parameters (Substitution Allowed):

• Manufacturer: Omron Automation and Safety
• Series: E2E
• Sensor Type: Inductive
• Output Type: NO, 2-Wire
• Response Frequency: 25Hz
• Voltage Supply Range: 20 VAC ~ 264 VAC
• Operating Temperature: -25°C ~ 70°C
• Ingress Protection: IP67
• Termination Style: Cable Leads
• Indicator: LED

Modified Parameters (Substitution Constraint):

• Sensing Distance: Changes from 0.079" (2mm) to 0.197" (5mm)
• Package / Case: Changes from Cylinder, Threaded - M8 to Cylinder, Threaded - M12
• Material - Body: Changes from Stainless Steel to Nickel-Plated Brass

The E2E-X5MY1 2M substitute part maintains electrical and functional compatibility while introducing a larger sensing distance and different mechanical form factor. This substitution is valid only when the application environment and mounting constraints accommodate the M12 threaded cylinder package and the extended 5mm sensing distance.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5MY1 2M is the manufacturer-recommended substitute for the obsolete E2E-X2MY1 2M. Both sensors are part of the Omron E2E series and share identical electrical specifications, including voltage supply range, response frequency, output configuration, and operating temperature limits.

The primary distinction between these components is the sensing distance and mechanical form factor. The substitute part features a 5mm sensing distance compared to the original 2mm, and utilizes an M12 threaded cylinder package instead of M8. The body material also differs, with the substitute employing nickel-plated brass rather than stainless steel.

Selection of the E2E-X5MY1 2M as a replacement is appropriate when:

• The application can accommodate the increased 5mm sensing distance
• The mounting location supports the larger M12 threaded cylinder form factor
• The nickel-plated brass body material is compatible with the operating environment

The active product status of the E2E-X5MY1 2M ensures ongoing availability and manufacturer support, addressing the obsolescence of the original component.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5MY1 2M directly replace the E2E-X2MY1 2M in all applications?

A: Direct replacement is possible only when the application environment and mechanical constraints accommodate the differences in sensing distance (5mm versus 2mm) and package size (M12 versus M8). The electrical specifications are identical, but the physical form factor and sensing range differ.

Q: What is the primary reason for substitution?

A: The E2E-X2MY1 2M is classified as obsolete. The E2E-X5MY1 2M is the manufacturer-recommended active substitute that maintains electrical compatibility while offering extended sensing distance.

Q: Are the voltage supply and operating temperature ranges identical?

A: Yes. Both sensors operate across 20 VAC to 264 VAC and function within -25°C to 70°C. The response frequency and output type (NO, 2-Wire) are also identical.

Q: How does the change in sensing distance affect system design?

A: The substitute part detects objects at 5mm distance compared to the original 2mm. Applications requiring detection at shorter distances may require design modification or alternative component selection.

Q: What is the difference in body material, and does it affect compatibility?

A: The original part uses stainless steel; the substitute uses nickel-plated brass. Material selection should be verified against the specific operating environment, particularly regarding corrosion resistance and chemical exposure requirements.

Q: Is the M12 threaded cylinder package compatible with M8 mounting locations?

A: No. The M12 package is larger and requires different mounting hardware and panel cutouts. Mechanical integration must be verified before implementation.

Q: Are both sensors IP67 rated?

A: Yes. Both the E2E-X2MY1 2M and E2E-X5MY1 2M maintain IP67 ingress protection, ensuring equivalent environmental sealing performance.