E2E-X2MF2-M3 Equivalent & Substitute Parts

Part Overview

The E2E-X2MF2-M3 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor operates with a 2mm sensing distance and provides PNP-NC output through a 3-wire connector configuration. The product is currently classified as obsolete, making identification of functionally equivalent active alternatives essential for system maintenance, redesign, and procurement planning.

Substiute Parts

E2E-X2MF2-M3

Omron Automation and SafetyIn Stock: 1039E2E-X2MF2-M3 Datasheet

Current PartRFQ

E2E-X2MB28-M3

Omron Automation and SafetyIn Stock: 1073E2E-X2MB28-M3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X2MB28-M3 qualifies as a direct substitute for the E2E-X2MF2-M3 based on the following critical parameters:

Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.079" (2mm)
• Output Type: PNP-NC, 3-Wire
• Package / Case: Cylinder, Threaded - M8
• Material - Body: Stainless Steel
• Termination Style: Connector
• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum requirement met; substitute offers IP67 and IP69K)
• RoHS Status: RoHS Compliant

Substitution Basis: The E2E-X2MB28-M3 belongs to the E2E NEXT series, representing an active product line evolution from the obsolete E2E series. Both sensors share identical mechanical form factors (M8 threaded cylinder), electrical output configurations (PNP-NC 3-wire), and sensing specifications (2mm inductive detection). The substitute maintains full compatibility with existing M8 connector installations and control circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2MB28-M3 is the designated substitute for the obsolete E2E-X2MF2-M3. Selection of the substitute is supported by:

• Product Status Alignment: The substitute is an active product in the E2E NEXT series, ensuring long-term availability and supply chain continuity.
• Compliance Certification: Both parts maintain RoHS compliance, satisfying regulatory requirements for new designs and system replacements.
• Functional Equivalence: Identical sensing distance, output configuration, and mechanical form factor ensure direct replacement capability in existing installations.
• Enhanced Specifications: The substitute offers improved response frequency (1kHz vs. 800Hz) and extended ingress protection rating (IP69K in addition to IP67), providing performance benefits in demanding environments.

For applications requiring the original 10V ~ 40V supply voltage range, circuit design review is necessary, as the substitute operates within 10V ~ 30V. Existing installations with supply voltages between 30V and 40V require voltage adjustment or alternative component selection.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2MB28-M3 directly replace the E2E-X2MF2-M3 in existing installations?

A: Yes, for applications operating within the 10V ~ 30V supply voltage range. Both sensors share identical M8 threaded connector form factors, PNP-NC 3-wire output configurations, and 2mm sensing distances. Mechanical and electrical integration is direct. If the original system operates at supply voltages above 30V, circuit modification is required.

Q: What are the key differences between these two sensors?

A: The primary differences are product status (obsolete vs. active), response frequency (800Hz vs. 1kHz), supply voltage range (10V ~ 40V vs. 10V ~ 30V), and ingress protection rating (IP67 vs. IP67/IP69K). The substitute offers faster response and enhanced environmental protection.

Q: Are both sensors compatible with M8 connector installations?

A: Yes. Both the E2E-X2MF2-M3 and E2E-X2MB28-M3 use identical M8 threaded cylinder packaging with connector termination. No mechanical modification or adapter is required for installation.

Q: Does the substitute maintain the same sensing distance?

A: Yes. Both sensors provide 0.079" (2mm) inductive sensing distance, ensuring equivalent detection performance in proximity-based applications.

Q: What is the significance of the higher response frequency in the substitute?

A: The E2E-X2MB28-M3 operates at 1kHz compared to the original 800Hz. This higher response frequency enables faster object detection cycles, beneficial in high-speed production environments or applications requiring rapid switching response.

Q: Are there any supply voltage compatibility concerns?

A: The original sensor supports 10V ~ 40V operation, while the substitute operates within 10V ~ 30V. If your system uses supply voltages between 30V and 40V, the substitute cannot be used without voltage regulation modifications.