E2E-X2MF2-M1 Equivalent & Substitute Parts

Part Overview

The E2E-X2MF2-M1 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection applications with a 2mm sensing distance. This sensor features PNP-NC output configuration, operates across a 10V to 40V supply range, and is housed in a stainless steel M8 threaded cylinder package with IP67 ingress protection rating.

The E2E-X2MF2-M1 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain system continuity, ensure supply chain reliability, and support ongoing maintenance and replacement requirements for existing installations.

Substiute Parts

E2E-X2MF2-M1

Omron Automation and SafetyIn Stock: 1099E2E-X2MF2-M1 Datasheet

Current PartRFQ

E2E-X2MB28-M1

Omron Automation and SafetyIn Stock: 851E2E-X2MB28-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X2MF2-M1 are identified based on the following critical parameters that determine functional equivalence:

• Sensor Type: Inductive (unchanged)
• Sensing Distance: 0.079" (2mm) (unchanged)
• Output Type: PNP-NC, 3-Wire (unchanged)
• Package / Case: Cylinder, Threaded - M8 (unchanged)
• Material - Body: Stainless Steel (unchanged)
• Termination Style: Connector (unchanged)
• Operating Temperature Range: -40°C ~ 85°C (unchanged)
• Ingress Protection: IP67 minimum (may be enhanced)
• RoHS Compliance: Required

The E2E-X2MB28-M1 meets all critical substitution criteria. This part maintains identical sensing distance, output configuration, mechanical form factor, and environmental ratings while representing an active product from the E2E NEXT series.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2MB28-M1 is the direct substitute for the obsolete E2E-X2MF2-M1. Both sensors share identical core specifications for sensing distance, output configuration, mechanical form factor, and environmental operating conditions.

The E2E-X2MB28-M1 represents an active product within the E2E NEXT series, ensuring ongoing availability and supply chain support. This part carries equivalent RoHS compliance certification and maintains the same stainless steel construction and M8 threaded connector interface.

When operating voltage is constrained to the 10V to 30V range, the E2E-X2MB28-M1 provides direct functional equivalence. Applications requiring supply voltages above 30V should evaluate alternative solutions or confirm voltage regulation within the substitute part's specified range.

The higher response frequency (1kHz versus 800Hz) of the substitute part provides enhanced switching capability and does not introduce compatibility issues in applications designed for the original 800Hz specification.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2MB28-M1 directly replace the E2E-X2MF2-M1 in existing installations?

A: Yes, the E2E-X2MB28-M1 provides direct functional replacement. Both sensors maintain identical sensing distance (2mm), output type (PNP-NC, 3-Wire), mechanical package (M8 threaded cylinder), and operating temperature range (-40°C to 85°C). Mechanical mounting and electrical connector compatibility are preserved.

Q: What is the voltage compatibility between these two sensors?

A: The E2E-X2MF2-M1 operates across 10V to 40V, while the E2E-X2MB28-M1 operates across 10V to 30V. Both sensors function within the 10V to 30V overlap range. Applications requiring supply voltages between 30V and 40V must implement voltage regulation or select alternative sensors.

Q: Are there differences in response speed between these sensors?

A: The E2E-X2MB28-M1 operates at 1kHz response frequency compared to the E2E-X2MF2-M1 at 800Hz. This represents an improvement in switching speed and does not create compatibility issues for applications designed around the original 800Hz specification.

Q: What is the difference in ingress protection ratings?

A: The E2E-X2MF2-M1 provides IP67 protection. The E2E-X2MB28-M1 provides both IP67 and IP69K protection ratings, offering enhanced sealing capability for high-pressure wash and submersion applications. Both meet or exceed the original IP67 requirement.

Q: Are both sensors RoHS compliant?

A: Yes, both the E2E-X2MF2-M1 and E2E-X2MB28-M1 carry RoHS compliance certification, meeting regulatory requirements for hazardous substance restrictions.

Q: What is the packaging difference between these sensors?

A: The E2E-X2MF2-M1 is packaged individually, while the E2E-X2MB28-M1 is supplied in box packaging. Both maintain identical mechanical form factor and connector interface specifications.