E2E-X2MF2 2M Equivalent & Substitute Parts

Part Overview

The E2E-X2MF2 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 2mm sensing distance and delivers PNP-NC output through a 3-wire configuration. The device features an M8 threaded cylinder housing with stainless steel construction and IP67 ingress protection rating.

The E2E-X2MF2 2M is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system functionality, ensure continued availability for replacement applications, and support long-term maintenance of installed equipment. Active alternative models within the E2E series provide enhanced specifications while maintaining core electrical and mechanical compatibility.

Substiute Parts

E2E-X2MF2 2M

Omron Automation and SafetyIn Stock: 951E2E-X2MF2 2M Datasheet

Current PartRFQ

E2E-X2MB28 2M

Omron Automation and SafetyIn Stock: 756E2E-X2MB28 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X2MF2 2M are identified based on strict alignment with the following critical parameters:

Electrical Compatibility:

• Sensor type: Inductive
• Output configuration: PNP-NC, 3-Wire
• Voltage supply range: 10V ~ 30V
• Sensing distance: 0.079" (2mm)

Mechanical Compatibility:

• Package style: Cylinder, Threaded - M8
• Body material: Stainless Steel
• Ingress protection: IP67 minimum

Environmental & Compliance:

• Operating temperature range: -40°C ~ 85°C
• RoHS compliance status

The E2E-X2MB28 2M qualifies as a direct substitute because it maintains all critical electrical parameters, mechanical form factor, and environmental specifications while offering enhanced response frequency and extended ingress protection rating (IP69K).

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2MB28 2M is the direct substitute for the obsolete E2E-X2MF2 2M. Both sensors share identical electrical specifications, mechanical form factors, and environmental operating parameters. The substitute part is manufactured by the same supplier (Omron Automation and Safety) and maintains full RoHS compliance.

The E2E-X2MB28 2M carries active product status, ensuring long-term availability and continued manufacturing support. This part is suitable for direct replacement in applications currently utilizing the E2E-X2MF2 2M without requiring circuit redesign or mechanical reconfiguration.

The substitute part offers enhanced response frequency (1kHz versus 800Hz) and extended ingress protection certification (IP69K in addition to IP67), providing improved performance characteristics for demanding industrial environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2MB28 2M directly replace the E2E-X2MF2 2M in existing installations?

A: Yes. Both sensors share identical electrical output configuration (PNP-NC, 3-Wire), voltage supply range (10V ~ 30V), sensing distance (2mm), and mechanical package (M8 threaded cylinder). The substitute part requires no circuit modifications or mechanical adapter components.

Q: What is the primary difference between these two sensors?

A: The E2E-X2MB28 2M operates at 1kHz response frequency compared to 800Hz for the E2E-X2MF2 2M. Additionally, the substitute part carries IP69K certification alongside IP67, providing enhanced protection in high-pressure wash and submersion environments.

Q: Are the termination styles compatible?

A: The E2E-X2MF2 2M features wire leads termination, while the E2E-X2MB28 2M uses cable leads. Both termination styles deliver identical electrical connectivity to the 3-wire PNP-NC output. Connector compatibility depends on the receiving circuit design.

Q: Does the substitute part maintain the same operating temperature range?

A: Yes. Both sensors operate across the -40°C to 85°C temperature range, ensuring thermal compatibility in equivalent environmental conditions.

Q: Is the substitute part RoHS compliant?

A: Yes. The E2E-X2MB28 2M is RoHS compliant, matching the compliance status of the original E2E-X2MF2 2M.

Q: Why is the E2E-X2MF2 2M classified as obsolete?

A: The E2E-X2MF2 2M has been superseded by the E2E NEXT series, represented by the E2E-X2MB28 2M. The newer model provides enhanced specifications while maintaining backward compatibility with existing applications.