E2E-X2ME2-M3 Equivalent & Substitute Parts

Part Overview

The E2E-X2ME2-M3 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This cylindrical M8-threaded sensor operates with a 2mm sensing distance and provides NPN-NC output configuration. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in ongoing production environments.

Substiute Parts

E2E-X2ME2-M3

Omron Automation and SafetyIn Stock: 678E2E-X2ME2-M3 Datasheet

Current PartRFQ

E2E-X2MC28-M3

Omron Automation and SafetyIn Stock: 768E2E-X2MC28-M3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X2ME2-M3 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (unchanged)
• Sensing Distance: 0.079" (2mm) (unchanged)
• Output Type: NPN-NC, 3-Wire (unchanged)
• Package / Case: Cylinder, Threaded - M8 (unchanged)
• Operating Temperature Range: -40°C ~ 85°C (unchanged)
• Ingress Protection: IP67 minimum (unchanged or enhanced)
• Material - Body: Stainless Steel (unchanged)
• RoHS Compliance: RoHS Compliant (unchanged)

The E2E-X2MC28-M3 satisfies all substitution criteria as an active product within the E2E NEXT series, maintaining mechanical and electrical compatibility while offering enhanced specifications in response frequency and supply voltage range optimization.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2MC28-M3 is the designated substitute for the obsolete E2E-X2ME2-M3. Both sensors maintain identical mechanical form factor (M8 cylinder), electrical output configuration (NPN-NC, 3-Wire), and sensing distance (2mm). The substitute operates within the same temperature range and maintains RoHS compliance.

The E2E-X2MC28-M3 is an active product with current manufacturing support and inventory availability. Direct pin-to-pin and mechanical compatibility is confirmed, enabling drop-in replacement in existing installations. The substitute's enhanced response frequency (1kHz versus 800Hz) and extended ingress protection rating (IP69K in addition to IP67) represent performance improvements over the original design.

Supply voltage range differs slightly: the substitute operates within 10V ~ 30V versus the original 10V ~ 40V. Applications requiring operation above 30V require circuit evaluation before substitution.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2MC28-M3 directly replace the E2E-X2ME2-M3 in existing installations?

A: Yes. Both sensors share identical M8 threaded cylinder packaging, NPN-NC 3-wire output configuration, 2mm sensing distance, and stainless steel construction. Mechanical and electrical compatibility is confirmed for direct substitution.

Q: What is the primary difference between these two sensors?

A: The E2E-X2MC28-M3 is the active successor within the E2E NEXT series. It offers improved response frequency (1kHz versus 800Hz) and enhanced ingress protection (IP69K capability). The substitute operates within a narrower supply voltage range (10V ~ 30V versus 10V ~ 40V).

Q: Are there supply voltage compatibility concerns?

A: Applications operating the original sensor at supply voltages above 30V require circuit modification before implementing the E2E-X2MC28-M3 substitute. Standard industrial 24V DC applications are fully compatible.

Q: Do both sensors require identical connector types?

A: Yes. Both sensors use connector-based termination. Existing wiring harnesses and connectors are compatible without modification.

Q: Is the E2E-X2MC28-M3 RoHS compliant?

A: Yes. The substitute maintains RoHS compliance status identical to the original E2E-X2ME2-M3.

Q: What is the inventory status of the substitute part?

A: The E2E-X2MC28-M3 is an active product with 755 pieces in current stock as new original inventory.