E2E-X2F2 5M Equivalent & Substitute Parts

Part Overview

The E2E-X2F2 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection with a 2mm sensing distance. This sensor features PNP-NC output configuration in a shielded M12 cylindrical package. The product is currently obsolete, making identification of compatible substitute parts essential for system maintenance and component sourcing.

Substiute Parts

E2E-X2F2 5M

Omron Automation and SafetyIn Stock: 1026E2E-X2F2 5M Datasheet

Current PartRFQ

E2E-X2B212 5M

Omron Automation and SafetyIn Stock: 1215E2E-X2B212 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X2B212 5M qualifies as a direct substitute based on the following critical parameters:

• Identical sensor type: Inductive
• Identical sensing distance: 0.079" (2mm)
• Identical output configuration: PNP-NC, 3-Wire
• Identical response frequency: 1.5kHz
• Identical shielding: Shielded
• Identical body material: Nickel-Plated Brass
• Identical termination style: Cable Leads
• Identical operating temperature range: -40°C ~ 85°C
• Identical ingress protection rating: IP67
• Identical indicator: LED
• Identical package type: Cylinder, Threaded - M12
• Identical RoHS compliance status

The substitute part operates within a narrower supply voltage range (10V ~ 30V versus 10V ~ 40V) and offers enhanced ingress protection (IP67, IP69K). The substitute is part of the E2E NEXT series and maintains active product status.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2B212 5M is the designated substitute for the obsolete E2E-X2F2 5M. Both components maintain identical electrical and mechanical specifications across all critical parameters. The substitute part is manufactured by the same supplier and carries active product status, ensuring long-term availability and supply chain continuity.

The E2E-X2B212 5M operates within a reduced supply voltage window (10V ~ 30V). Applications requiring the full 10V ~ 40V range of the original part must confirm that system voltage remains within 10V ~ 30V before implementation.

Both parts are RoHS compliant and carry identical ECCN and HTSUS classifications, supporting regulatory and compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2B212 5M directly replace the E2E-X2F2 5M in existing installations?

A: Yes. Both sensors share identical sensing distance, output type, response frequency, shielding, body material, termination style, operating temperature range, and M12 cylindrical package configuration. Electrical and mechanical compatibility is confirmed across all specified parameters.

Q: What is the primary difference between these two parts?

A: The E2E-X2B212 5M operates within a narrower supply voltage range (10V ~ 30V) compared to the E2E-X2F2 5M (10V ~ 40V). The substitute also offers enhanced ingress protection with IP69K rating in addition to IP67. The substitute is part of the newer E2E NEXT series and maintains active product status.

Q: Does the reduced voltage range of the substitute part affect compatibility?

A: Compatibility depends on system voltage specifications. If the application operates within 10V ~ 30V, the substitute is fully compatible. Applications requiring operation above 30V must retain the original part or identify alternative solutions.

Q: Are both parts certified for the same regulatory standards?

A: Yes. Both the E2E-X2F2 5M and E2E-X2B212 5M are RoHS compliant and share identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications.

Q: What is the significance of the E2E NEXT series designation?

A: The E2E NEXT series represents an updated product line from Omron. The E2E-X2B212 5M maintains backward compatibility with the legacy E2E series while offering enhanced features and active product support.