Omron E2E-X2E1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E-X2E1 is a cylindrical inductive proximity sensor with a 2mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor operates as an NPN normally-open switch with a 3-wire configuration and is housed in a shielded M12 threaded cylinder package.

The E2E-X2E1 carries an obsolete product status. Locating equivalent or substitute components is necessary to maintain system continuity and ensure access to current manufacturing support and inventory availability.

Substiute Parts

E2E-X2E1

Omron Automation and SafetyIn Stock: 330609E2E-X2E1 Datasheet

Current PartRFQ

E2E-X2C112 2M

Omron Automation and SafetyIn Stock: 993E2E-X2C112 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete E2E-X2E1 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (non-contact detection principle)
• Sensing Distance: 0.079" (2mm) (detection range requirement)
• Output Type: NPN-NO, 3-Wire (signal interface and logic type)
• Response Frequency: 1.5kHz (switching speed capability)
• Shielding: Shielded (electromagnetic interference rejection)
• Material - Body: Nickel-Plated Brass (environmental durability)
• Voltage - Supply: Minimum 10V, Maximum 40V (power supply compatibility)
• Operating Temperature: -40°C ~ 85°C (thermal operating range)
• Ingress Protection: IP67 minimum (environmental sealing)
• Package / Case: Cylinder, Threaded - M12 (mechanical form factor and mounting)
• Termination Style: Cable Leads (connection method)
• RoHS Status: RoHS Compliant (regulatory compliance)

The E2E-X2C112 2M meets all substitution criteria and is classified as the manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2C112 2M is the direct substitute for the obsolete E2E-X2E1. Both sensors share identical functional parameters across all critical specifications: inductive sensing principle, 2mm detection distance, NPN-NO 3-wire output, 1.5kHz response frequency, shielded construction, M12 threaded cylinder package, and cable lead termination.

The E2E-X2C112 2M belongs to the E2E NEXT series and maintains active product status with current manufacturing support. The substitute operates within a reduced supply voltage range (10V ~ 30V versus 10V ~ 40V), which is acceptable provided the application power supply does not exceed 30V. The substitute offers enhanced ingress protection (IP67 and IP69K) compared to the main part (IP67 only), providing superior environmental sealing capability.

Both components are RoHS compliant and carry identical regulatory classifications (ECCN: EAR99; HTSUS: 8543.70.9860).

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2C112 2M directly replace the E2E-X2E1 in existing installations?

A: Yes, provided the application power supply operates within the 10V ~ 30V range. The E2E-X2C112 2M shares all critical functional parameters with the E2E-X2E1, including sensing distance, output type, response frequency, and mechanical form factor. The M12 threaded cylinder package ensures identical mounting compatibility.

Q: What is the key difference in voltage supply specifications between these sensors?

A: The E2E-X2E1 accepts 10V ~ 40V supply voltage, while the E2E-X2C112 2M accepts 10V ~ 30V. If your application requires operation above 30V, the E2E-X2C112 2M is not suitable. Verify your system power supply specification before selection.

Q: Does the E2E-X2C112 2M offer any performance advantages over the E2E-X2E1?

A: The E2E-X2C112 2M provides enhanced ingress protection with dual IP67 and IP69K ratings, compared to IP67 only on the E2E-X2E1. This offers superior protection in high-pressure wash and harsh environmental applications. All other functional parameters remain equivalent.

Q: Are there any compatibility concerns with cable leads and M12 connectors?

A: Both sensors use cable lead termination and M12 threaded cylinder packages. No compatibility issues exist for mechanical mounting or connector interfaces. Verify cable specifications and connector types match your application requirements.

Q: Is the E2E-X2C112 2M currently available in inventory?

A: The E2E-X2C112 2M carries active product status with current manufacturing support. Inventory availability should be confirmed through your supplier, as stock levels vary by region and distribution channel.