E2E-X1R5F2 Equivalent & Substitute Parts

Part Overview

The E2E-X1R5F2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 1.5mm sensing distance and delivers PNP-NC output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of functionally equivalent alternatives from current production lines to maintain system continuity and ensure long-term component availability.

Substiute Parts

E2E-X1R5F2

Omron Automation and SafetyIn Stock: 1141E2E-X1R5F2 Datasheet

Current PartRFQ

E2B-S08KS02-WP-B2 5M

Omron Automation and SafetyIn Stock: 912E2B-S08KS02-WP-B2 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X1R5F2 is based on the following critical parameters that define functional equivalence:

• Sensor Type: Inductive proximity sensing technology
• Output Configuration: PNP-NC, 3-Wire output topology
• Mechanical Form Factor: Cylinder, Threaded - M8 package
• Environmental Rating: IP67 ingress protection
• Material Compatibility: Stainless steel body construction
• Supply Voltage Range: Overlap within 10V ~ 40V specification
• Termination: Cable leads connection method

The E2B-S08KS02-WP-B2 5M qualifies as a substitute based on matching sensor type, output configuration, mechanical package, environmental protection, material specification, and termination style. Variations in sensing distance (2mm vs. 1.5mm), response frequency (1.5kHz vs. 2kHz), and operating temperature range represent design trade-offs within the inductive proximity sensor product family and do not preclude substitution in applications where these parameter differences are acceptable.

Parameter Comparison

Engineering Selection Recommendations

The E2B-S08KS02-WP-B2 5M is an active production component with ROHS3 compliance, providing regulatory advantage over the obsolete E2E-X1R5F2. Both sensors share identical output topology (PNP-NC, 3-Wire), mechanical packaging (M8 cylinder, threaded), environmental protection (IP67), and material specification (stainless steel body).

Selection of the E2B-S08KS02-WP-B2 5M requires evaluation of application-specific tolerances for sensing distance differential (2mm vs. 1.5mm) and operating temperature range (−25°C ~ 70°C vs. −40°C ~ 85°C). The substitute operates within a reduced supply voltage window (10V ~ 30V vs. 10V ~ 40V) and exhibits lower response frequency (1.5kHz vs. 2kHz). These parameter variations must be validated against system requirements prior to implementation.

Frequently Asked Questions (FAQ)

Q: Can the E2B-S08KS02-WP-B2 5M directly replace the E2E-X1R5F2 in existing installations?

A: Direct mechanical and electrical compatibility exists due to matching M8 threaded cylinder package, PNP-NC 3-wire output configuration, and cable lead termination. Application compatibility depends on whether the 2mm sensing distance (versus 1.5mm) and 1.5kHz response frequency (versus 2kHz) meet system detection and timing requirements.

Q: What are the critical differences between these two sensors?

A: The primary differences are sensing distance (1.5mm vs. 2mm), response frequency (2kHz vs. 1.5kHz), maximum supply voltage (40V vs. 30V), and operating temperature range (−40°C ~ 85°C vs. −25°C ~ 70°C). All other functional parameters—sensor type, output configuration, shielding, material, ingress protection, and mechanical form factor—are equivalent.

Q: Is the E2B-S08KS02-WP-B2 5M suitable for low-temperature applications below −25°C?

A: No. The E2B-S08KS02-WP-B2 5M is rated for −25°C minimum operating temperature. Applications requiring operation below −25°C must retain the E2E-X1R5F2 or identify alternative sensors with extended low-temperature specifications.

Q: Does the reduced supply voltage range of the E2B-S08KS02-WP-B2 5M affect compatibility?

A: The E2B-S08KS02-WP-B2 5M operates within 10V ~ 30V. If the system supplies voltage above 30V, the substitute is not compatible. Verify actual system supply voltage against this specification before selection.

Q: What is the significance of the sensing distance difference?

A: The E2B-S08KS02-WP-B2 5M detects objects at 2mm distance compared to 1.5mm for the E2E-X1R5F2. Applications with tight spatial constraints or requiring detection of smaller objects may not tolerate this increased sensing distance.

Q: Are both sensors RoHS compliant?

A: Yes. The E2E-X1R5F2 is RoHS Compliant, and the E2B-S08KS02-WP-B2 5M is ROHS3 Compliant. Both meet environmental regulatory requirements for restricted substance use.