E2E-X1C2 Equivalent & Substitute Parts

Part Overview

The E2E-X1C2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial automation applications. This sensor features a 1mm sensing distance, NPN-NC output configuration, and operates across a 10V to 30V supply voltage range. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

E2E-X1C2

Omron Automation and SafetyIn Stock: 1049E2E-X1C2 Datasheet

Current PartRFQ

E2E-S05S12-WC-C2 2M

Omron Automation and SafetyIn Stock: 1016E2E-S05S12-WC-C2 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X1C2 can be substituted with the E2E-S05S12-WC-C2 2M based on the following critical parameters that determine functional compatibility:

Maintained Parameters (Substitution Basis):

• Sensor Type: Inductive (both models)
• Output Type: NPN-NC, 3-Wire (both models)
• Voltage Supply Range: 10V ~ 30V (both models)
• Operating Temperature Range: -25°C ~ 70°C (both models)
• Ingress Protection: IP67 (both models)
• Package / Case: Cylinder, Threaded - M5 (both models)
• Termination Style: Cable Leads (both models)
• Shielding: Shielded (both models)
• Indicator: LED (both models)

Allowable Variations:

• Sensing Distance: 0.039" (1mm) vs. 0.047" (1.2mm) — within acceptable tolerance for proximity sensor applications
• Response Frequency: 3kHz vs. 4kHz — improved response capability in substitute
• Material - Body: Nickel-Plated Brass vs. Stainless Steel — enhanced corrosion resistance in substitute
• Product Status: Obsolete vs. Active — substitute is currently in production

Parameter Comparison

Engineering Selection Recommendations

The E2E-S05S12-WC-C2 2M is a direct substitute for the obsolete E2E-X1C2. The substitute maintains all critical electrical and mechanical parameters required for functional compatibility within the same application context.

The E2E-S05S12-WC-C2 2M offers the following advantages:

• Active product status ensures ongoing availability and manufacturer support
• ROHS3 compliance and REACH unaffected status provide regulatory alignment for current procurement standards
• Stainless steel body construction provides enhanced environmental durability compared to nickel-plated brass
• Improved response frequency (4kHz vs. 3kHz) supports faster detection cycles
• Sensing distance variation (1.2mm vs. 1mm) remains within acceptable tolerance for inductive proximity sensor applications

Frequently Asked Questions (FAQ)

Q: Can the E2E-S05S12-WC-C2 2M directly replace the E2E-X1C2 in existing installations?

A: Yes. Both sensors share identical output type (NPN-NC, 3-Wire), voltage supply range (10V ~ 30V), operating temperature range (-25°C ~ 70°C), mechanical package (M5 cylinder threaded), and ingress protection rating (IP67). The 0.2mm difference in sensing distance (1mm vs. 1.2mm) is within acceptable tolerance for proximity detection applications.

Q: What is the significance of the sensing distance difference between these models?

A: The E2E-X1C2 operates at 1mm sensing distance, while the E2E-S05S12-WC-C2 2M operates at 1.2mm. This 0.2mm variation represents a 20% increase in detection range. Applications requiring precise 1mm detection should evaluate whether the extended range of the substitute affects system performance.

Q: Why is the E2E-X1C2 classified as obsolete?

A: The E2E-X1C2 has been discontinued by Omron Automation and Safety. The E2E-S05S12-WC-C2 2M represents the current active product line within the E2E series and is the recommended replacement for new designs and system maintenance.

Q: Are there compliance differences between these models?

A: The E2E-S05S12-WC-C2 2M carries ROHS3 compliance and REACH unaffected status, providing alignment with current environmental and regulatory standards. The E2E-X1C2 compliance status is not fully specified, making the substitute preferable for applications subject to regulatory requirements.

Q: Does the material difference (nickel-plated brass vs. stainless steel) affect substitution?

A: The stainless steel construction of the E2E-S05S12-WC-C2 2M provides superior corrosion resistance compared to the nickel-plated brass of the E2E-X1C2. This represents an improvement for applications exposed to moisture, chemicals, or harsh environmental conditions.

Q: What is the impact of the response frequency increase (3kHz to 4kHz)?

A: The higher response frequency of the E2E-S05S12-WC-C2 2M enables faster detection cycles. Applications operating at or near 3kHz switching speeds should evaluate whether the improved response capability affects system timing or control logic.