E2E-X1C1-R Equivalent & Substitute Parts

Part Overview

The E2E-X1C1-R is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This cylindrical M5-threaded sensor operates with a 1mm sensing distance and provides NPN-NO output through 3-wire cable leads. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance and component procurement.

Substiute Parts

E2E-X1C1-R

Omron Automation and SafetyIn Stock: 1032E2E-X1C1-R Datasheet

Current PartRFQ

E2E-S05S12-MC-C1

Omron Automation and SafetyIn Stock: 1080E2E-S05S12-MC-C1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-S05S12-MC-C1 qualifies as a functional substitute based on the following critical parameters:

Matching Parameters:

• Inductive sensor type with shielded design
• Identical voltage supply range (10V ~ 30V)
• Identical operating temperature range (-25°C ~ 70°C)
• Identical ingress protection rating (IP67)
• Identical package form factor (Cylinder, Threaded - M5)
• Identical output configuration (NPN-NO, 3-Wire)
• Same manufacturer series (E2E)

Allowable Variations:

• Sensing distance: 1.2mm (E2E-S05S12-MC-C1) versus 1mm (E2E-X1C1-R) — represents a 0.2mm increase in detection range
• Response frequency: 4kHz (E2E-S05S12-MC-C1) versus 3kHz (E2E-X1C1-R) — represents improved response capability
• Material composition: Stainless steel body (E2E-S05S12-MC-C1) versus nickel-plated brass (E2E-X1C1-R) — provides enhanced corrosion resistance
• Termination style: Connector (E2E-S05S12-MC-C1) versus cable leads (E2E-X1C1-R) — requires interface adaptation
• Product status: Active (E2E-S05S12-MC-C1) versus obsolete (E2E-X1C1-R) — ensures ongoing availability

Parameter Comparison

Engineering Selection Recommendations

The E2E-S05S12-MC-C1 is the designated substitute for the obsolete E2E-X1C1-R. Selection of this alternative is supported by:

Product Status Alignment: The substitute maintains active product status with Omron, ensuring continued availability, technical support, and supply chain reliability.

Regulatory Compliance: The E2E-S05S12-MC-C1 carries ROHS3 compliance and REACH affected status, meeting current environmental and safety regulations. The original part's vendor-undefined REACH status presents compliance uncertainty for new installations.

Functional Equivalence: Both sensors operate within identical electrical parameters (10V ~ 30V supply, -25°C ~ 70°C operating range) and maintain identical output logic (NPN-NO, 3-Wire). The M5 threaded cylinder form factor ensures mechanical interchangeability.

Performance Enhancement: The substitute provides improved response frequency (4kHz versus 3kHz) and extended sensing distance (1.2mm versus 1mm), representing performance gains rather than degradation.

Material Upgrade: Stainless steel construction in the substitute offers superior corrosion resistance compared to nickel-plated brass, beneficial for harsh or chemically aggressive environments.

Interface Consideration: The transition from cable leads to connector termination requires mechanical interface adaptation at the installation point but does not affect electrical compatibility.

Frequently Asked Questions (FAQ)

Q: Can the E2E-S05S12-MC-C1 directly replace the E2E-X1C1-R without modifications?

A: Electrical and functional replacement is direct. Mechanical installation requires adaptation due to termination style differences: the substitute uses a connector interface rather than cable leads. The M5 threaded mounting remains identical.

Q: What is the significance of the 0.2mm difference in sensing distance?

A: The E2E-S05S12-MC-C1 detects objects at 1.2mm compared to the original 1mm. This represents a 20% increase in detection range. Applications requiring detection at exactly 1mm or closer may require gap adjustment or repositioning of the target object.

Q: Does the stainless steel body affect electrical performance?

A: No. Material composition affects environmental durability and corrosion resistance, not electrical characteristics. Both sensors maintain identical voltage supply ranges, output types, and response frequencies within their respective specifications.

Q: Why is the substitute listed as ROHS3 compliant while the original shows vendor-undefined REACH status?

A: The E2E-X1C1-R is obsolete and no longer subject to active compliance documentation updates. The E2E-S05S12-MC-C1, as an active product, maintains current regulatory certifications required for modern procurement and environmental standards.

Q: Is the 4kHz response frequency of the substitute compatible with systems designed for 3kHz?

A: Yes. The substitute's higher response frequency (4kHz) is backward compatible with systems designed for 3kHz operation. The faster response time represents an improvement and does not create incompatibility.

Q: What connector type does the E2E-S05S12-MC-C1 use?

A: The specific connector type is not detailed in the provided specifications. Verification with Omron technical documentation or the connector interface standard for the E2E series is required for procurement of compatible mating connectors.