E2E-X1C1 5M Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The E2E-X1C1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection of metallic objects at a sensing distance of 1mm (0.039"). This cylindrical, threaded M5 sensor operates with NPN-NO output configuration and is housed in a nickel-plated brass body with IP67 ingress protection rating.

The E2E-X1C1 5M is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain system functionality, ensure continued availability, and support ongoing maintenance and replacement requirements in applications where this sensor is currently deployed.

Substiute Parts

E2E-X1C1 5M

Omron Automation and SafetyIn Stock: 898E2E-X1C1 5M Datasheet

Current PartRFQ

E2E-S05S12-MC-C1

Omron Automation and SafetyIn Stock: 1080E2E-S05S12-MC-C1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X1C1 5M is based on the following critical parameters that must remain consistent or compatible:

• Sensor Type: Inductive (fixed requirement)
• Package / Case: Cylinder, Threaded - M5 (mechanical compatibility)
• Output Type: NPN-NO, 3-Wire (electrical interface)
• Voltage - Supply: 10V ~ 30V (power compatibility)
• Ingress Protection: IP67 (environmental sealing)
• Operating Temperature: -25°C ~ 70°C (thermal range)
• Shielding: Shielded (electromagnetic interference protection)

The E2E-S05S12-MC-C1 qualifies as a substitute part because it maintains compatibility across all critical parameters. Variations in sensing distance (1mm vs. 1.2mm), response frequency (3kHz vs. 4kHz), body material (nickel-plated brass vs. stainless steel), and termination style (cable leads vs. connector) represent acceptable engineering trade-offs within the E2E series design envelope.

Parameter Comparison

Engineering Selection Recommendations

The E2E-S05S12-MC-C1 is the designated substitute for the obsolete E2E-X1C1 5M. This substitution is supported by:

• Active product status of the E2E-S05S12-MC-C1, ensuring continued availability and manufacturer support
• Full electrical and mechanical compatibility within the E2E series platform
• Maintained compliance with IP67 ingress protection and operating temperature specifications
• RoHS3 compliance and REACH affected status of the substitute part, reflecting current regulatory requirements
• Identical supply voltage range (10V ~ 30V) and output configuration (NPN-NO, 3-Wire)

The stainless steel body material of the E2E-S05S12-MC-C1 provides enhanced corrosion resistance compared to the nickel-plated brass of the original part, suitable for applications requiring extended environmental durability. The connector termination style of the substitute part offers improved modularity compared to the cable leads of the original design.

Frequently Asked Questions (FAQ)

Q: Can the E2E-S05S12-MC-C1 be used as a direct replacement for the E2E-X1C1 5M?

A: Yes. Both sensors share identical electrical output configuration (NPN-NO, 3-Wire), supply voltage range (10V ~ 30V), operating temperature range (-25°C ~ 70°C), and mechanical form factor (M5 threaded cylinder). The substitute part maintains IP67 ingress protection and LED indicator functionality.

Q: What is the difference in sensing distance between these two parts?

A: The E2E-X1C1 5M has a sensing distance of 1mm (0.039"), while the E2E-S05S12-MC-C1 has a sensing distance of 1.2mm (0.047"). This 0.2mm difference may affect detection accuracy in applications with tight tolerance requirements. Verify that the increased sensing distance is acceptable for your specific application geometry.

Q: Does the change from cable leads to connector termination affect compatibility?

A: The termination style change from cable leads to connector represents a physical interface modification. Applications using the original cable lead configuration will require connector adaptation or rewiring to accommodate the substitute part's connector termination.

Q: Why is the substitute part's response frequency higher (4kHz vs. 3kHz)?

A: The E2E-S05S12-MC-C1 operates at 4kHz response frequency compared to the 3kHz of the original part. This higher frequency provides faster detection response and is compatible with standard industrial control systems designed for the E2E series.

Q: What are the compliance differences between the two parts?

A: The E2E-X1C1 5M product status is obsolete with undefined REACH status. The E2E-S05S12-MC-C1 is active with RoHS3 compliance and REACH affected status, reflecting current regulatory requirements for electronic components in industrial applications.