E2E-X1C1 Equivalent & Substitute Parts

Part Overview

The Omron E2E-X1C1 is an inductive proximity sensor with a 1mm sensing distance, designed for industrial automation applications requiring compact cylindrical form factors. This sensor features NPN-NO output configuration with 3-wire termination and operates across a 10V to 30V supply range. The product is currently classified as obsolete, necessitating identification of functionally compatible alternatives for ongoing system maintenance and new installations.

Substiute Parts

E2E-X1C1

Omron Automation and SafetyIn Stock: 795E2E-X1C1 Datasheet

Current PartRFQ

E2E-S05S12-WC-C1 2M

Omron Automation and SafetyIn Stock: 330295E2E-S05S12-WC-C1 2M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-S05S12-WC-C1 2M qualifies as a direct substitute based on the following critical parameters:

• Sensor Type: Both are inductive proximity sensors
• Output Configuration: Both feature NPN-NO, 3-Wire output
• Supply Voltage Range: Both operate at 10V ~ 30V
• Shielding: Both are shielded designs
• Termination: Both use cable leads
• Operating Temperature: Both support -25°C ~ 70°C range
• Ingress Protection: Both meet IP67 rating
• Package Form Factor: Both use M5 threaded cylinder housing
• Series Compatibility: Both belong to the Omron E2E series

The substitute part maintains functional equivalence across all critical electrical and mechanical interfaces, enabling direct replacement in existing installations.

Parameter Comparison

Engineering Selection Recommendations

The E2E-S05S12-WC-C1 2M is the designated substitute for the obsolete E2E-X1C1. The substitute part maintains active product status with Omron, ensuring ongoing availability and supply chain continuity. Both parts comply with REACH regulations and carry EAR99 ECCN classification. The substitute achieves ROHS3 compliance, providing enhanced environmental and regulatory alignment for new system designs.

The sensing distance differential of 0.2mm (1mm versus 1.2mm) and response frequency increase (3kHz to 4kHz) represent minor performance variations within typical industrial automation tolerances. The material upgrade from nickel-plated brass to stainless steel in the substitute part provides improved corrosion resistance for extended operational life in demanding environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-S05S12-WC-C1 2M directly replace the E2E-X1C1 in existing installations?

A: Yes. Both sensors share identical electrical interfaces (NPN-NO, 3-Wire output), supply voltage requirements (10V ~ 30V), and mechanical form factors (M5 threaded cylinder). The cable lead termination style is consistent across both parts.

Q: What is the significance of the 0.2mm sensing distance difference?

A: The E2E-S05S12-WC-C1 2M operates at 1.2mm sensing distance compared to the E2E-X1C1's 1mm. This difference affects detection range and must be evaluated against specific application requirements. Applications requiring detection at exactly 1mm may require mechanical adjustment or system recalibration.

Q: Why does the substitute part have a higher response frequency?

A: The E2E-S05S12-WC-C1 2M operates at 4kHz versus the E2E-X1C1's 3kHz. This increased response frequency provides faster switching capability, which is compatible with systems designed for the original 3kHz specification and may improve performance in high-speed detection scenarios.

Q: What packaging differences exist between these parts?

A: The E2E-X1C1 is packaged individually, while the E2E-S05S12-WC-C1 2M is supplied in bulk packaging. This distinction affects procurement quantities and inventory management but does not impact functional performance or compatibility.

Q: Are there compliance or certification differences?

A: The E2E-S05S12-WC-C1 2M carries ROHS3 compliance certification, whereas the E2E-X1C1 does not specify this status. Both parts meet REACH requirements and carry identical ECCN and HTSUS classifications. The substitute part provides enhanced regulatory alignment for applications requiring ROHS3 compliance.