E2E-X18MF2 2M Equivalent & Substitute Parts

Part Overview

The E2E-X18MF2 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor features an 18mm (0.709") sensing distance in a compact M30 threaded cylinder form factor with IP67 ingress protection rating.

The E2E-X18MF2 2M is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system functionality, ensure continued availability for replacement applications, and support long-term maintenance requirements for installed equipment.

Substiute Parts

E2E-X18MF2 2M

Omron Automation and SafetyIn Stock: 720E2E-X18MF2 2M Datasheet

Current PartRFQ

E2E-X18MB230 2M

Omron Automation and SafetyIn Stock: 798E2E-X18MB230 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X18MF2 2M is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.709" (18mm)
• Output Type: PNP-NC, 3-Wire
• Response Frequency: 100Hz
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case Style: Cylinder, Threaded - M30
• Material - Body: Nickel-Plated Brass
• Shielding: Unshielded
• Ingress Protection Rating: IP67 (minimum)
• RoHS Compliance: Required

The E2E-X18MB230 2M satisfies all mandatory matching parameters and qualifies as a direct substitute. This part maintains identical electrical specifications, mechanical form factor, and environmental ratings while offering active product status and enhanced ingress protection (IP67, IP69K).

Parameter Comparison

Engineering Selection Recommendations

The E2E-X18MB230 2M is the qualified substitute for the obsolete E2E-X18MF2 2M based on the following engineering criteria:

Electrical Compatibility: Both parts operate identically across all electrical parameters including supply voltage range (10V ~ 30V), output configuration (PNP-NC, 3-Wire), and response frequency (100Hz). Direct electrical substitution is supported without circuit modification.

Mechanical Compatibility: Both sensors share identical mechanical specifications: M30 threaded cylinder form factor, 18mm sensing distance, and nickel-plated brass construction. Physical mounting and installation procedures remain unchanged.

Environmental Compliance: The E2E-X18MB230 2M maintains the required IP67 ingress protection rating and extends environmental capability to IP69K, providing enhanced protection in high-pressure wash and submersion applications. Both parts operate across the identical temperature range (-40°C ~ 85°C).

Regulatory Status: The E2E-X18MB230 2M holds active product status with RoHS compliance certification, ensuring long-term availability and regulatory alignment. The obsolete E2E-X18MF2 2M requires replacement to maintain compliance and support continuity.

Termination Consideration: The E2E-X18MB230 2M features cable leads termination, whereas the E2E-X18MF2 2M uses wire leads. Integration into existing harnesses or connectors requires assessment of the termination interface in the target application.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MB230 2M directly replace the E2E-X18MF2 2M in existing installations?

A: Yes, the E2E-X18MB230 2M provides direct electrical and mechanical substitution. All critical parameters including sensing distance, output type, voltage range, and operating temperature are identical. The primary consideration is the termination style difference: cable leads versus wire leads. Verify compatibility with existing connectors or harness interfaces before installation.

Q: What is the difference between the termination styles?

A: The E2E-X18MF2 2M uses wire leads for direct soldering or terminal connection. The E2E-X18MB230 2M uses cable leads, providing a pre-assembled cable assembly. Cable leads offer improved durability and simplified integration in many applications but require connector compatibility verification.

Q: Are there any performance differences between these sensors?

A: No performance differences exist across electrical or sensing specifications. Both sensors deliver 100Hz response frequency, 18mm sensing distance, and PNP-NC output. The E2E-X18MB230 2M provides enhanced environmental protection (IP69K in addition to IP67), which does not affect standard operation but extends capability in demanding wash or submersion environments.

Q: Why is the E2E-X18MF2 2M obsolete?

A: Product obsolescence reflects manufacturer lifecycle decisions. The E2E-X18MB230 2M represents the current active equivalent within the E2E NEXT series, offering improved availability and long-term support.

Q: Is the E2E-X18MB230 2M available in the same quantities as the E2E-X18MF2 2M?

A: Current inventory status shows 736 pieces of the E2E-X18MB230 2M available, compared to 700 pieces of the obsolete E2E-X18MF2 2M. The active substitute maintains robust stock levels for production and replacement applications.

Q: What certifications apply to the E2E-X18MB230 2M?

A: The E2E-X18MB230 2M holds RoHS compliance certification and carries ECCN classification EAR99 with HTSUS code 8543.70.9860 for regulatory and trade documentation purposes.