Equivalent & Substitute Parts for E2E-X18MF2

Part Overview

The E2E-X18MF2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor features an 18mm cylindrical form factor with M30 threaded mounting and operates across a wide voltage range of 10V to 40V. The product is currently classified as obsolete, making identification of compatible substitute components essential for system maintenance, repair, and new installations where legacy compatibility is required.

Substiute Parts

E2E-X18MF2

Omron Automation and SafetyIn Stock: 888E2E-X18MF2 Datasheet

Current PartRFQ

E2E-X18MB230 2M

Omron Automation and SafetyIn Stock: 798E2E-X18MB230 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X18MF2 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (non-contact detection principle)
• Sensing Distance: 0.709" (18mm) (detection range capability)
• Output Type: PNP-NC, 3-Wire (signal logic and connection configuration)
• Response Frequency: 100Hz (switching speed capability)
• Package / Case: Cylinder, Threaded - M30 (mechanical form factor and mounting interface)
• Termination Style: Cable Leads (connection method)
• Ingress Protection: IP67 minimum (environmental sealing requirement)
• Operating Temperature Range: -40°C ~ 85°C (thermal operating envelope)
• Material - Body: Nickel-Plated Brass (corrosion resistance and material compatibility)

The E2E-X18MB230 2M qualifies as a direct substitute because it maintains all critical parameters while offering enhanced environmental protection (IP69K) and represents an active product status within the E2E NEXT series.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X18MB230 2M is the manufacturer-recommended substitute for the obsolete E2E-X18MF2. Both components are RoHS compliant and share identical core functional parameters across sensor type, detection distance, output configuration, response frequency, and mechanical form factor.

The primary operational difference is the voltage supply range: the E2E-X18MF2 accepts 10V to 40V, while the E2E-X18MB230 2M operates within 10V to 30V. Applications requiring supply voltages above 30V must retain the original E2E-X18MF2 or identify alternative solutions outside this substitute relationship.

The E2E-X18MB230 2M offers enhanced environmental protection with dual IP67/IP69K ratings compared to the single IP67 rating of the original part, making it suitable for high-pressure wash and demanding industrial environments. Both sensors maintain identical operating temperature specifications of -40°C to 85°C.

The substitute part belongs to the E2E NEXT series and carries active product status, ensuring long-term availability and continued manufacturer support compared to the obsolete status of the original component.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MB230 2M directly replace the E2E-X18MF2 in all applications?

A: Direct replacement is possible when the system supply voltage does not exceed 30V. The E2E-X18MF2 supports voltages up to 40V, while the substitute is limited to 30V maximum. Verify your system voltage specification before substitution.

Q: What is the significance of the "2M" designation in the E2E-X18MB230 2M part number?

A: The "2M" designation indicates a 2-meter cable lead length. This specification is part of the complete part number and should be confirmed to match your installation requirements.

Q: Are the mechanical mounting interfaces identical between these two sensors?

A: Yes. Both sensors use the same M30 threaded cylindrical form factor, enabling direct mechanical substitution without modification to mounting hardware or installation fixtures.

Q: Why is the E2E-X18MB230 2M classified as an active product while the E2E-X18MF2 is obsolete?

A: The E2E-X18MB230 2M represents the current generation within the E2E NEXT series and continues to receive manufacturer support and production. The E2E-X18MF2 has been discontinued and is no longer manufactured or actively supported.

Q: Does the enhanced IP69K rating of the substitute part affect compatibility?

A: No. IP69K is a higher protection classification that includes all IP67 requirements. The substitute part maintains full IP67 compatibility while offering additional environmental sealing capability for high-pressure applications.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E-X18MF2 and E2E-X18MB230 2M are RoHS compliant, meeting regulatory requirements for hazardous substance restrictions.