E2E-X18MF1-R 2M Equivalent & Substitute Parts

Part Overview

The E2E-X18MF1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety. This 18mm (0.709") cylindrical sensor operates with PNP-NO output configuration and is designed for industrial detection applications requiring IP67 ingress protection. The product is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain functional and electrical compatibility for ongoing system support and new installations.

Key Parameters

Parameter	Value
Sensor Type	Inductive
Sensing Distance	0.709" (18mm)
Output Type	PNP-NO, 3-Wire
Response Frequency	100Hz
Voltage Supply	10V ~ 30V
Operating Temperature	-40°C ~ 85°C
Ingress Protection	IP67
Package / Case	Cylinder, Threaded - M30
Material - Body	Nickel-Plated Brass
Shielding	Unshielded
RoHS Status	RoHS Compliant

Substitute Part Grouping Explanation

Substitution of the obsolete E2E-X18MF1-R 2M is based on strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

Sensor type (Inductive)
Sensing distance (0.709" / 18mm)
Output configuration (PNP-NO, 3-Wire)
Response frequency (100Hz)
Supply voltage range (10V ~ 30V)

Mechanical & Environmental Parameters:

Package form factor (Cylinder, Threaded - M30)
Body material (Nickel-Plated Brass)
Shielding configuration (Unshielded)
Operating temperature range (-40°C ~ 85°C)
Ingress protection minimum (IP67)

Compliance Parameters:

RoHS compliance status

The E2E-X18MB1D30-R 2M meets all specified electrical and mechanical parameters while offering enhanced ingress protection (IP67, IP69K) and active product status, making it a direct functional equivalent.

Parameter Comparison

Parameter	E2E-X18MF1-R 2M (Main)	E2E-X18MB1D30-R 2M (Substitute)	Match Status
Sensor Type	Inductive	Inductive	Equivalent
Sensing Distance	0.709" (18mm)	0.709" (18mm)	Equivalent
Output Type	PNP-NO, 3-Wire	PNP-NO, 3-Wire	Equivalent
Response Frequency	100Hz	100Hz	Equivalent
Voltage Supply	10V ~ 30V	10V ~ 30V	Equivalent
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	Equivalent
Ingress Protection	IP67	IP67, IP69K	Substitute Exceeds
Package / Case	Cylinder, Threaded - M30	Cylinder, Threaded - M30	Equivalent
Material - Body	Nickel-Plated Brass	Nickel-Plated Brass	Equivalent
Shielding	Unshielded	Unshielded	Equivalent
RoHS Status	RoHS Compliant	RoHS Compliant	Equivalent
Product Status	Obsolete	Active	Substitute Active

Engineering Selection Recommendations

The E2E-X18MB1D30-R 2M is the direct equivalent substitute for the obsolete E2E-X18MF1-R 2M. Both sensors are manufactured by Omron Automation and Safety and belong to the E2E series family of inductive proximity sensors.

Selection Basis:

The substitute part maintains complete electrical and mechanical compatibility with the original part across all critical parameters. The E2E-X18MB1D30-R 2M is classified as an active product with current manufacturing status, ensuring long-term availability and supply chain continuity. Both parts carry RoHS compliance certification, meeting regulatory requirements for industrial applications.

The primary distinction between the two parts is product lifecycle status: the original E2E-X18MF1-R 2M has reached end-of-life classification, while the E2E-X18MB1D30-R 2M remains in active production. The substitute offers enhanced ingress protection rating (IP69K in addition to IP67), providing superior environmental sealing without compromising any original specifications.

Termination style differs between the parts (wire leads versus cable leads); this distinction affects installation methodology but does not alter electrical performance or functional compatibility in applications where the M30 threaded connection is utilized.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MB1D30-R 2M directly replace the E2E-X18MF1-R 2M in existing installations?

A: Yes. Both sensors share identical electrical specifications (PNP-NO output, 100Hz response frequency, 10V-30V supply voltage), mechanical form factor (M30 threaded cylinder), and environmental ratings (IP67 minimum). The M30 threaded connection ensures mechanical interchangeability in mounting applications.

Q: What is the difference between wire leads and cable leads termination?

A: The E2E-X18MF1-R 2M uses wire leads (individual conductor wires), while the E2E-X18MB1D30-R 2M uses cable leads (integrated cable assembly). Cable leads provide integrated strain relief and simplified connection to control systems. Both termination styles deliver identical electrical performance and are compatible with standard industrial wiring practices.

Q: Does the enhanced IP69K rating on the substitute part affect compatibility?

A: No. IP69K is a higher ingress protection classification than the original IP67 rating. The substitute part maintains full IP67 compatibility while offering additional environmental sealing capability. This enhancement does not introduce incompatibility and provides superior protection in high-pressure wash or submersion environments.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X18MF1-R 2M and E2E-X18MB1D30-R 2M carry RoHS compliance certification, meeting regulatory requirements for hazardous substance restrictions in industrial electronics.

Q: What is the sensing distance specification for both sensors?

A: Both sensors provide 0.709 inches (18mm) sensing distance. This specification defines the maximum detection range for ferrous metal targets and is identical across both part numbers.

Q: Why is the original part classified as obsolete?

A: Product obsolescence reflects end-of-life status in the manufacturer's product lifecycle. The E2E-X18MF1-R 2M has been superseded by the E2E-X18MB1D30-R 2M within the E2E NEXT series, which maintains functional equivalence while offering active production status and enhanced specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message