E2E-X18MF1 5M Equivalent & Substitute Parts

Part Overview

The E2E-X18MF1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor features an 18mm (0.709") sensing distance in a compact M30 threaded cylinder form factor with IP67 ingress protection rating.

The E2E-X18MF1 5M is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system functionality, ensure continued availability for replacement applications, and support long-term equipment maintenance where original components are no longer in production.

Substiute Parts

E2E-X18MF1 5M

Omron Automation and SafetyIn Stock: 1117E2E-X18MF1 5M Datasheet

Current PartRFQ

E2E-X18MB1D30 5M

Omron Automation and SafetyIn Stock: 764E2E-X18MB1D30 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X18MF1 5M are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.709" (18mm)
• Output Type: PNP-NO, 3-Wire
• Response Frequency: 100Hz
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: Cylinder, Threaded - M30
• Material - Body: Nickel-Plated Brass
• Ingress Protection: IP67 (minimum)
• Shielding: Unshielded

The E2E-X18MB1D30 5M meets all critical electrical and mechanical parameters required for direct substitution. This part belongs to the E2E NEXT series and maintains full compatibility with applications designed for the E2E-X18MF1 5M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X18MB1D30 5M is the direct substitute for the obsolete E2E-X18MF1 5M. This part is classified as active and currently in production, ensuring long-term availability and supply chain continuity.

Compliance and Certification: Both parts maintain RoHS compliance. The E2E-X18MB1D30 5M carries ECCN classification EAR99 and HTSUS code 8543.70.9860, indicating standard commercial export classification.

Termination Consideration: The primary difference between these parts is the termination style. The E2E-X18MF1 5M uses wire leads, while the E2E-X18MB1D30 5M uses cable leads. This difference requires evaluation of the installation environment and connector interface requirements. Both termination styles are compatible with standard industrial control circuits when properly integrated.

Enhanced Protection Rating: The E2E-X18MB1D30 5M provides IP69K ingress protection in addition to IP67, offering enhanced sealing capability for high-pressure wash and submersion applications. This represents an improvement over the original part specification.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MB1D30 5M directly replace the E2E-X18MF1 5M in existing installations?

A: Yes. The E2E-X18MB1D30 5M matches all critical electrical and mechanical parameters of the E2E-X18MF1 5M, including sensor type, sensing distance, output configuration, voltage supply range, operating temperature range, and mechanical form factor. Integration requires evaluation of the termination style difference (cable leads versus wire leads) relative to the specific installation.

Q: What is the difference between wire leads and cable leads termination?

A: Wire leads consist of individual stranded conductors extending from the sensor body. Cable leads integrate the conductors within a unified cable jacket. Both termination styles provide equivalent electrical performance. Selection depends on the connector interface and installation method of the target application.

Q: Does the E2E-X18MB1D30 5M provide better environmental protection than the original part?

A: The E2E-X18MB1D30 5M maintains the IP67 rating of the original part and additionally supports IP69K classification. IP69K provides enhanced protection against high-pressure water jets and temporary submersion. Applications requiring only IP67 protection will function identically with both parts.

Q: Are there inventory considerations when selecting the substitute part?

A: The E2E-X18MB1D30 5M is an active product with current manufacturing and distribution. The E2E-X18MF1 5M is obsolete and no longer produced. For new installations or long-term maintenance planning, the E2E-X18MB1D30 5M ensures continued availability and supply chain reliability.

Q: What series does the substitute part belong to?

A: The E2E-X18MB1D30 5M belongs to the E2E NEXT series, representing the current generation of Omron 18mm inductive proximity sensors. The original E2E-X18MF1 5M belongs to the E2E series.