E2E-X18ME2 2M Equivalent & Substitute Parts

Part Overview

The E2E-X18ME2 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor features an 18mm (0.709") sensing distance in a compact M30 threaded cylinder form factor with IP67 ingress protection rating.

The E2E-X18ME2 2M is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality, ensure continued availability for replacement applications, and support long-term equipment maintenance where original parts are no longer manufactured.

Substiute Parts

E2E-X18ME2 2M

Omron Automation and SafetyIn Stock: 931E2E-X18ME2 2M Datasheet

Current PartRFQ

E2E-X18MC230 2M

Omron Automation and SafetyIn Stock: 790E2E-X18MC230 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X18ME2 2M are identified based on strict electrical and mechanical parameter matching. The following parameters define substitution eligibility:

Critical Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.709" (18mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 100Hz
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case Style: Cylinder, Threaded - M30
• Material - Body: Nickel-Plated Brass
• Shielding: Unshielded
• RoHS Compliance: RoHS Compliant

The E2E-X18MC230 2M qualifies as a direct substitute because it maintains all critical electrical parameters and mechanical specifications. The primary distinction is product status: the substitute is an active product from the E2E NEXT series, whereas the original is obsolete. Both sensors operate within identical voltage, temperature, and frequency specifications and share the same M30 threaded cylinder housing.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X18MC230 2M is the designated substitute for the obsolete E2E-X18ME2 2M. Both sensors maintain identical electrical specifications and mechanical form factors, ensuring functional compatibility in existing installations.

Product Status Consideration: The E2E-X18MC230 2M is an active product within the E2E NEXT series, providing assured long-term availability and continued manufacturing support. The original E2E-X18ME2 2M is obsolete and no longer produced.

Compliance Status: Both parts are RoHS Compliant. The substitute carries ECCN classification EAR99 and HTSUS code 8543.70.9860.

Termination Difference: The original part features wire leads termination, while the substitute uses cable leads termination. This distinction requires evaluation of the specific installation method and connector interface in the target application.

Enhanced Protection Rating: The substitute provides IP69K rating in addition to IP67, offering extended environmental protection capability without compromising the baseline IP67 specification.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MC230 2M directly replace the E2E-X18ME2 2M in existing applications?

A: The E2E-X18MC230 2M maintains all critical electrical and mechanical parameters required for functional substitution. However, the termination style differs: the original uses wire leads while the substitute uses cable leads. Installation compatibility depends on the connector interface and wiring methodology of the target system.

Q: What is the primary reason for substitution?

A: The E2E-X18ME2 2M is obsolete and no longer manufactured. The E2E-X18MC230 2M is an active product providing equivalent functionality with assured availability.

Q: Are the sensing distances identical?

A: Yes. Both sensors provide 0.709" (18mm) sensing distance with identical response frequency of 100Hz.

Q: Do both sensors operate within the same voltage range?

A: Yes. Both sensors operate within 10V ~ 30V supply voltage range and maintain identical operating temperature specifications of -40°C ~ 85°C.

Q: What is the difference in ingress protection ratings?

A: The original E2E-X18ME2 2M provides IP67 protection. The substitute E2E-X18MC230 2M provides both IP67 and IP69K protection, offering enhanced environmental sealing capability.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E-X18ME2 2M and E2E-X18MC230 2M are RoHS Compliant.

Q: What is the significance of the termination style difference?

A: The original part uses wire leads for direct connection, while the substitute uses cable leads. The selection between these termination styles depends on the specific installation requirements, connector type, and wiring infrastructure of the target application.

Q: Which series does the substitute belong to?

A: The E2E-X18MC230 2M belongs to the E2E NEXT series, representing the current generation of Omron inductive proximity sensors in this product family.