Equivalent & Substitute Parts for E2E-X18ME2

Part Overview

The E2E-X18ME2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with an 18mm sensing distance and provides NPN-NC output configuration suitable for control circuits and PLC integration. The product is classified as obsolete, making identification of functionally equivalent active alternatives essential for system maintenance, redesign, and procurement planning.

Substiute Parts

E2E-X18ME2

Omron Automation and SafetyIn Stock: 707E2E-X18ME2 Datasheet

Current PartRFQ

E2E-X18MC230 2M

Omron Automation and SafetyIn Stock: 790E2E-X18MC230 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X18ME2 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.709" (18mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 100Hz
• Package / Case: Cylinder, Threaded - M30
• Termination Style: Cable Leads
• Material - Body: Nickel-Plated Brass
• Operating Temperature Range: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum)

Allowable Parameter Variations:

• Voltage Supply: Substitute must operate within the supply voltage range of the original part (10V ~ 40V). A substitute with a narrower range (10V ~ 30V) remains compatible if the application operates within that narrower range.
• Product Status: Active substitutes are preferred for obsolete parts to ensure long-term availability and support.

The E2E-X18MC230 2M qualifies as a direct substitute based on matching all mandatory parameters and maintaining compatibility within the specified voltage supply window.

Parameter Comparison

*Compatible: The E2E-X18MC230 2M operates within 10V ~ 30V. Applications using supply voltages between 30V and 40V with the original part require circuit evaluation.

Engineering Selection Recommendations

The E2E-X18MC230 2M is the manufacturer-recommended substitute for the obsolete E2E-X18ME2. Selection of this active alternative provides the following advantages:

Product Status: The E2E-X18MC230 2M carries active product status, ensuring continued manufacturing support, availability, and technical documentation from Omron Automation and Safety.

Compliance: Both parts maintain RoHS Compliant certification, satisfying regulatory requirements for industrial and commercial applications.

Functional Equivalence: All critical electrical and mechanical parameters align with the original specification, enabling direct replacement in existing circuit designs and mechanical assemblies.

Enhanced Protection: The E2E-X18MC230 2M provides dual ingress protection ratings (IP67 and IP69K), offering extended environmental protection compared to the original IP67 rating.

Supply Voltage Consideration: Applications operating at supply voltages above 30V must be evaluated to confirm compatibility with the substitute part's 10V ~ 30V operating range.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MC230 2M be used as a direct replacement for the E2E-X18ME2?

A: Yes. The E2E-X18MC230 2M matches all critical parameters including sensor type, sensing distance, output configuration, response frequency, package dimensions, and operating temperature range. Direct mechanical and electrical substitution is supported.

Q: What is the difference in voltage supply specifications?

A: The E2E-X18ME2 operates at 10V ~ 40V, while the E2E-X18MC230 2M operates at 10V ~ 30V. If your application uses supply voltages between 30V and 40V, the substitute part may not be suitable without circuit modification.

Q: Are the M30 threaded packages identical?

A: Yes. Both sensors use the Cylinder, Threaded - M30 package configuration, ensuring identical mechanical fit and mounting compatibility.

Q: Does the E2E-X18MC230 2M provide better environmental protection?

A: The E2E-X18MC230 2M is rated for both IP67 and IP69K ingress protection, compared to the original part's IP67 rating. This provides enhanced protection in high-pressure wash and submersion environments.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X18ME2 and E2E-X18MC230 2M are RoHS Compliant, meeting environmental and regulatory standards for industrial applications.

Q: What is the cable lead termination configuration?

A: Both sensors use cable leads for termination, providing flexible connection options for integration into control circuits and PLC systems.