E2E-X18ME1 2M Equivalent & Substitute Parts

Part Overview

The E2E-X18ME1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with an 18mm sensing distance in an M30 threaded cylinder form factor and delivers NPN-NO output signals suitable for PLC and control system integration.

The E2E-X18ME1 2M carries an Obsolete product status. Locating equivalent or substitute components is necessary to maintain system functionality, ensure continued availability for replacement applications, and support long-term equipment maintenance where original stock is depleted.

Substiute Parts

E2E-X18ME1 2M

Omron Automation and SafetyIn Stock: 989E2E-X18ME1 2M Datasheet

Current PartRFQ

E2E-X18MC130 2M

Omron Automation and SafetyIn Stock: 725E2E-X18MC130 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute components for the E2E-X18ME1 2M are identified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Critical Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.709" (18mm)
• Output Type: NPN-NO, 3-Wire
• Response Frequency: 100Hz
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum)
• Package / Case: Cylinder, Threaded - M30
• Material - Body: Nickel-Plated Brass
• RoHS Status: RoHS Compliant

The E2E-X18MC130 2M qualifies as a direct substitute based on complete alignment across all critical electrical parameters, mechanical form factor, environmental ratings, and regulatory compliance. The primary distinction is the transition from Wire Leads termination to Cable Leads termination and elevation to Active product status within the E2E NEXT series.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X18MC130 2M is the designated substitute for the obsolete E2E-X18ME1 2M based on the following engineering criteria:

Electrical Compatibility: All core electrical parameters—sensor type, sensing distance, output configuration, response frequency, and supply voltage range—are identical between the main part and substitute. The 3-Wire NPN-NO output maintains direct compatibility with existing control circuits and PLC input modules.

Environmental and Mechanical Compatibility: Both sensors share identical operating temperature ranges, ingress protection ratings (with the substitute offering enhanced IP69K capability), M30 threaded cylinder form factor, and nickel-plated brass construction. These characteristics ensure mechanical interchangeability within existing mounting assemblies.

Regulatory Compliance: Both components maintain RoHS Compliant status, satisfying environmental and hazardous substance restrictions applicable to industrial automation equipment.

Product Status Transition: The E2E-X18MC130 2M carries Active product status within the E2E NEXT series, ensuring long-term availability, continued manufacturer support, and access to current production inventory. This transition from Obsolete to Active status provides supply chain continuity for replacement and new installation requirements.

Termination Consideration: The substitute employs Cable Leads termination in place of Wire Leads. This difference requires evaluation of existing connector interfaces and wiring harness configurations in the target application. Cable Leads termination typically offers enhanced durability and simplified integration in industrial environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X18MC130 2M directly replace the E2E-X18ME1 2M in existing installations?

A: Yes, the E2E-X18MC130 2M provides direct electrical and mechanical substitution. All critical parameters—sensing distance, output type, voltage supply, operating temperature, and form factor—are identical. The primary consideration is the termination style change from Wire Leads to Cable Leads, which requires verification of connector compatibility with existing wiring harnesses.

Q: What is the significance of the IP69K rating on the substitute part?

A: The E2E-X18MC130 2M includes both IP67 and IP69K ingress protection ratings. IP69K represents a higher protection level suitable for high-pressure wash and steam cleaning environments. The original E2E-X18ME1 2M specifies IP67. This enhancement in the substitute part provides expanded environmental capability without compromising compatibility with standard IP67 applications.

Q: Are there differences in response frequency or sensing distance between these sensors?

A: No. Both the E2E-X18ME1 2M and E2E-X18MC130 2M operate at 100Hz response frequency with an 18mm (0.709") sensing distance. These parameters are identical and ensure equivalent detection performance in control applications.

Q: What does the transition from Obsolete to Active product status mean for procurement?

A: The E2E-X18MC130 2M carries Active status, indicating current production, manufacturer support, and reliable long-term availability. The E2E-X18ME1 2M is Obsolete, meaning production has ceased and existing inventory is limited. Transitioning to the Active substitute ensures access to current stock and continued support for future replacement needs.

Q: Are the voltage supply and operating temperature ranges identical?

A: Yes. Both sensors operate across 10V to 30V supply voltage and -40°C to 85°C operating temperature ranges. These specifications are identical, ensuring equivalent performance across standard industrial control environments.

Q: What connector types are used with each termination style?

A: The E2E-X18ME1 2M uses Wire Leads, requiring direct wire connection or custom connector assembly. The E2E-X18MC130 2M uses Cable Leads, typically featuring integrated connectors or pre-terminated cable assemblies. Verification of connector type and compatibility with existing system interfaces is necessary during substitution planning.

Q: Is the substitute part RoHS compliant?

A: Yes. The E2E-X18MC130 2M maintains RoHS Compliant status, identical to the original E2E-X18ME1 2M. Both components satisfy environmental and hazardous substance restrictions applicable to industrial automation equipment.