E2E-X10MF1 5M Equivalent & Substitute Parts

Part Overview

The E2E-X10MF1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor operates with a 10mm sensing distance and provides PNP-NO output through a 3-wire configuration. The product is classified as Obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

E2E-X10MF1 5M

Omron Automation and SafetyIn Stock: 754E2E-X10MF1 5M Datasheet

Current PartRFQ

E2E-X10MB1D18 5M

Omron Automation and SafetyIn Stock: 1002E2E-X10MB1D18 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X10MB1D18 5M qualifies as a direct substitute based on the following critical parameters:

• Sensing Distance: Both parts maintain 0.394" (10mm) detection range, ensuring equivalent functional performance in target detection applications
• Output Configuration: Both provide PNP-NO, 3-Wire output, maintaining signal compatibility with existing control circuits
• Package / Case: Both use Cylinder, Threaded - M18 form factor, enabling mechanical interchangeability in mounting applications
• Termination Style: Both employ Cable Leads, supporting identical wiring integration
• Material - Body: Both feature Nickel-Plated Brass construction, providing equivalent environmental resistance
• Operating Temperature Range: Both operate across -40°C ~ 85°C, maintaining thermal compatibility
• Ingress Protection: Both meet IP67 minimum rating, with the substitute offering enhanced IP69K capability
• RoHS Compliance: Both are RoHS Compliant, satisfying regulatory requirements
• Supply Voltage Compatibility: The substitute operates within 10V ~ 30V, which is contained within the original part's 10V ~ 40V range

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MB1D18 5M is the designated substitute for the obsolete E2E-X10MF1 5M. Both parts maintain identical sensing distance, output configuration, and mechanical form factor, ensuring functional equivalence in inductive proximity sensing applications.

The substitute part offers the following advantages:

• Active Product Status: The E2E-X10MB1D18 5M is an active product with confirmed inventory availability (981 Pcs), ensuring long-term supply chain reliability
• Enhanced Response Frequency: The substitute provides 400Hz response frequency compared to the original 200Hz, enabling faster detection cycles in high-speed applications
• Extended Ingress Protection: The substitute adds IP69K rating in addition to IP67, providing enhanced protection in high-pressure wash environments
• RoHS Compliance: Both parts satisfy RoHS regulatory requirements

Supply voltage compatibility requires verification: applications operating above 30V must confirm that the substitute's 10V ~ 30V range aligns with system design parameters. The original part's 10V ~ 40V range accommodates higher voltage supplies; systems designed for voltages between 30V and 40V require circuit redesign or alternative component selection.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MB1D18 5M directly replace the E2E-X10MF1 5M in existing installations?

A: Yes, for applications operating within the 10V ~ 30V supply voltage range. Both parts share identical sensing distance (10mm), output type (PNP-NO, 3-Wire), M18 threaded cylinder package, and cable lead termination. Applications requiring supply voltages between 30V and 40V require circuit modification or alternative component selection.

Q: What is the primary difference between these two inductive proximity sensors?

A: The E2E-X10MB1D18 5M is the successor model in the E2E NEXT series with an active product status. Key differences include doubled response frequency (400Hz vs. 200Hz), reduced maximum supply voltage (30V vs. 40V), and enhanced ingress protection (IP67 and IP69K vs. IP67 only).

Q: Are the mechanical packages identical?

A: Yes. Both sensors use a Cylinder, Threaded - M18 package with Cable Leads termination, enabling direct mechanical interchangeability in mounting applications.

Q: What does the "Obsolete" status mean for the E2E-X10MF1 5M?

A: Obsolete status indicates the E2E-X10MF1 5M is no longer manufactured or supported by Omron Automation and Safety. The E2E-X10MB1D18 5M is the active replacement part for new designs and system maintenance.

Q: Are both parts RoHS Compliant?

A: Yes. Both the E2E-X10MF1 5M and E2E-X10MB1D18 5M are RoHS Compliant, satisfying regulatory requirements for hazardous substance restrictions.

Q: What is the significance of the higher response frequency in the substitute part?

A: The E2E-X10MB1D18 5M operates at 400Hz compared to the original 200Hz. This doubled response frequency enables detection of faster-moving objects and supports higher-speed production line applications.

Q: Can I use the E2E-X10MB1D18 5M in applications requiring 35V supply voltage?

A: No. The substitute part operates within 10V ~ 30V supply range. Applications requiring 35V must use the original E2E-X10MF1 5M or select an alternative component rated for higher voltage operation.