E2E-X10MF1 2M Equivalent & Substitute Parts

Part Overview

The E2E-X10MF1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 10mm (0.394") sensing distance and delivers PNP-NO output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure ongoing component availability for new installations and field replacements.

Substiute Parts

E2E-X10MF1 2M

Omron Automation and SafetyIn Stock: 1122E2E-X10MF1 2M Datasheet

Current PartRFQ

E2E-X10MB1D18 2M

Omron Automation and SafetyIn Stock: 995E2E-X10MB1D18 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X10MB1D18 2M qualifies as a direct substitute for the E2E-X10MF1 2M based on alignment of critical electrical and mechanical parameters. Substitution compatibility is established through the following criteria:

Electrical Compatibility:

• Identical sensing distance: 0.394" (10mm)
• Identical output configuration: PNP-NO, 3-Wire
• Identical supply voltage range: 10V ~ 30V
• Identical operating temperature range: -40°C ~ 85°C

Mechanical Compatibility:

• Identical package form factor: Cylinder, Threaded - M18
• Identical body material: Nickel-Plated Brass
• Identical ingress protection rating: IP67 (substitute includes additional IP69K rating)

Regulatory Compliance:

• Both parts are RoHS Compliant
• Both parts feature MSL 1 (Unlimited) moisture sensitivity level

The E2E-X10MB1D18 2M represents an active product within the E2E NEXT series, providing enhanced performance characteristics while maintaining full backward compatibility with the obsolete E2E-X10MF1 2M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MB1D18 2M is the designated substitute for the obsolete E2E-X10MF1 2M. Selection of the substitute part is based on the following engineering factors:

Product Status Transition: The E2E-X10MF1 2M has reached end-of-life status. The E2E-X10MB1D18 2M, classified as an active product, provides continuity for applications requiring 10mm inductive proximity sensing with M18 threaded cylinder packaging.

Regulatory Compliance: Both parts maintain RoHS Compliance certification, ensuring compatibility with environmental and regulatory requirements across industrial markets.

Performance Enhancement: The substitute part delivers doubled response frequency (400Hz versus 200Hz), providing improved detection speed for applications requiring faster cycle times. This enhancement does not compromise backward compatibility with existing electrical interfaces.

Mechanical and Electrical Equivalence: Identical sensing distance, output configuration, supply voltage range, operating temperature range, and M18 threaded form factor ensure direct substitution without circuit redesign or mechanical modification.

Termination Consideration: The substitute part features cable leads rather than wire leads. Integration into existing harnesses requires assessment of connector compatibility and installation methodology specific to the application environment.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MB1D18 2M directly replace the E2E-X10MF1 2M in existing installations?

A: Yes. Both parts share identical electrical specifications (10V ~ 30V supply, PNP-NO 3-wire output, 10mm sensing distance) and mechanical form factor (M18 threaded cylinder). The substitute part is mechanically and electrically compatible for direct substitution. Termination style differs (cable leads versus wire leads), requiring assessment of connector integration in the specific installation.

Q: What is the difference in response frequency between these parts?

A: The E2E-X10MF1 2M operates at 200Hz response frequency, while the E2E-X10MB1D18 2M operates at 400Hz. The doubled response frequency of the substitute part enables faster object detection cycles without affecting voltage supply requirements or output signal compatibility.

Q: Are both parts rated for the same environmental conditions?

A: Both parts operate across the identical temperature range (-40°C to 85°C) and share IP67 ingress protection rating. The substitute part additionally carries IP69K certification, providing enhanced protection in high-pressure wash environments. This additional rating does not restrict use in standard IP67 applications.

Q: What is the significance of the E2E NEXT series designation for the substitute part?

A: The E2E NEXT series represents the current generation of Omron inductive proximity sensors. The E2E-X10MB1D18 2M is the active product line continuation of the obsolete E2E series, maintaining backward compatibility while incorporating performance enhancements and extended environmental certifications.

Q: Does the cable lead termination of the substitute part affect compatibility?

A: The termination style change from wire leads to cable leads requires assessment of connector compatibility within the specific application. The electrical interface (PNP-NO 3-wire output) remains identical. Installation methodology and harness integration must be evaluated based on the existing system design.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X10MF1 2M and E2E-X10MB1D18 2M are RoHS Compliant, meeting environmental and regulatory requirements for industrial component applications.