E2E-X10ME2-M1 Equivalent & Substitute Parts

Part Overview

The E2E-X10ME2-M1 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor features a 10mm sensing distance, NPN-NC output configuration, and M18 threaded cylindrical housing. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and component sourcing in ongoing production environments.

Substiute Parts

E2E-X10ME2-M1

Omron Automation and SafetyIn Stock: 968E2E-X10ME2-M1 Datasheet

Current PartRFQ

E2E-X10MC218-M1

Omron Automation and SafetyIn Stock: 1080E2E-X10MC218-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X10ME2-M1 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (fixed requirement)
• Sensing Distance: 0.394" (10mm) (fixed requirement)
• Output Configuration: NPN-NC, 3-Wire (fixed requirement)
• Package / Case: Cylinder, Threaded - M18 (fixed requirement)
• Termination Style: Connector (fixed requirement)
• Ingress Protection: IP67 minimum (fixed requirement)
• Operating Temperature Range: -40°C ~ 85°C (fixed requirement)
• Material - Body: Nickel-Plated Brass (fixed requirement)
• RoHS Compliance: Required (fixed requirement)

The E2E-X10MC218-M1 meets all critical substitution criteria. This part belongs to the E2E NEXT series, representing an active product line evolution from the obsolete E2E series. Both parts share the same base product number (E2E-X10), confirming functional equivalence within Omron's product architecture.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MC218-M1 is the qualified substitute for the obsolete E2E-X10ME2-M1. Selection is based on the following engineering criteria:

Product Status: The E2E-X10MC218-M1 is an active product within Omron's current E2E NEXT series, ensuring long-term availability and supply chain continuity compared to the obsolete status of the original part.

Compliance & Certification: Both parts maintain RoHS compliance and identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications, confirming regulatory equivalence for export and procurement purposes.

Functional Compatibility: The substitute part maintains all critical electrical and mechanical parameters required for direct replacement: identical sensing distance (10mm), output configuration (NPN-NC, 3-Wire), M18 threaded housing, connector termination, and operating temperature range (-40°C ~ 85°C).

Performance Enhancement: The E2E-X10MC218-M1 provides improved response frequency (400Hz versus 200Hz) and extended ingress protection (IP67 and IP69K versus IP67 only), representing a performance upgrade within the same form factor.

Voltage Supply Consideration: The substitute part operates within a narrower supply voltage range (10V ~ 30V) compared to the original (10V ~ 40V). Verify that system supply voltage does not exceed 30V DC to ensure compatibility.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MC218-M1 directly replace the E2E-X10ME2-M1 in existing installations?

A: Yes. Both parts share identical sensing distance (10mm), output type (NPN-NC, 3-Wire), M18 threaded housing, connector termination, and operating temperature range. Electrical and mechanical interfaces are fully compatible.

Q: What is the primary difference between these two parts?

A: The E2E-X10MC218-M1 is the active successor from the E2E NEXT series, offering improved response frequency (400Hz versus 200Hz) and enhanced ingress protection (IP67 and IP69K). The original E2E-X10ME2-M1 is obsolete.

Q: Is there a voltage supply limitation I should be aware of?

A: Yes. The substitute part (E2E-X10MC218-M1) operates within 10V ~ 30V DC, while the original supported 10V ~ 40V DC. Confirm that your system supply voltage does not exceed 30V to ensure proper operation.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X10ME2-M1 and E2E-X10MC218-M1 are RoHS compliant with identical regulatory classifications (ECCN: EAR99, HTSUS: 8543.70.9860).

Q: What does the M18 designation indicate?

A: M18 refers to the metric thread size of the cylindrical housing. Both parts use identical M18 threaded connectors, ensuring mechanical compatibility in mounting applications.

Q: Does the improved response frequency (400Hz) affect system compatibility?

A: No. The higher response frequency of the substitute part (400Hz versus 200Hz) represents improved performance and does not create compatibility issues. Systems designed for the original 200Hz specification will operate correctly with the faster-responding substitute.

Q: Are the connector termination styles identical?

A: Yes. Both parts use connector-based termination, ensuring identical wiring and integration procedures.