Omron E2E-X10ME1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E-X10ME1 is an inductive proximity sensor designed for non-contact detection in industrial automation applications. This sensor operates with a 10mm sensing distance and provides NPN normally-open output through a 3-wire configuration. The product is classified as obsolete, making identification of functionally equivalent alternatives essential for system maintenance, repair, and new installations where legacy component replacement is required.

Substiute Parts

E2E-X10ME1

Omron Automation and SafetyIn Stock: 995E2E-X10ME1 Datasheet

Current PartRFQ

E2E-X10MC118 2M

Omron Automation and SafetyIn Stock: 859E2E-X10MC118 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X10ME1 is determined by strict alignment of the following critical parameters:

• Sensor Type: Must be Inductive
• Sensing Distance: Must be 0.394" (10mm)
• Output Configuration: Must be NPN-NO, 3-Wire
• Package / Case: Must be Cylinder, Threaded - M18
• Ingress Protection: Minimum IP67
• Voltage Supply Range: Must accommodate the operating voltage of the original circuit
• Operating Temperature Range: Must cover -40°C ~ 85°C
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• RoHS Compliance: Required

The E2E-X10MC118 2M meets all substitution criteria as an active product within the E2E NEXT series, providing direct functional equivalence with enhanced specifications in response frequency and ingress protection rating.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MC118 2M is the direct substitute for the obsolete E2E-X10ME1. Both components share identical core specifications for sensing distance, output type, mechanical form factor, and environmental ratings. The substitute part is manufactured by the same supplier and maintains RoHS compliance.

The E2E-X10MC118 2M offers operational improvements including doubled response frequency (400Hz versus 200Hz) and extended ingress protection certification (IP69K in addition to IP67). The voltage supply range of the substitute (10V ~ 30V) is narrower than the original (10V ~ 40V); circuit voltage must not exceed 30V for compatibility.

Selection of the E2E-X10MC118 2M is appropriate for direct replacement in existing installations and new designs requiring 10mm inductive proximity sensing with M18 cylindrical packaging.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MC118 2M directly replace the E2E-X10ME1 in existing circuits?

A: Direct replacement is possible when the circuit supply voltage does not exceed 30V. The E2E-X10ME1 operates at 10V ~ 40V, while the substitute operates at 10V ~ 30V. All other electrical and mechanical parameters are compatible.

Q: What is the difference in response frequency between these sensors?

A: The E2E-X10ME1 has a response frequency of 200Hz, while the E2E-X10MC118 2M operates at 400Hz. The higher frequency of the substitute allows faster detection cycles and is suitable for higher-speed applications.

Q: Are the physical dimensions and mounting identical?

A: Both sensors use the same M18 cylindrical threaded package with cable lead termination. Mechanical mounting and installation procedures are identical.

Q: What does the "2M" designation in the part number indicate?

A: The "2M" suffix indicates a 2-meter cable lead length. This specification is included in the complete part number E2E-X10MC118 2M.

Q: Is the substitute part currently available?

A: The E2E-X10MC118 2M is classified as an active product with current manufacturing status, ensuring availability for procurement and future supply.

Q: Do both sensors meet the same environmental protection standards?

A: The E2E-X10ME1 meets IP67. The E2E-X10MC118 2M meets both IP67 and IP69K, providing enhanced protection in high-pressure wash and submersion environments.