E2E-X10F1-R 2M Equivalent & Substitute Parts

Part Overview

The E2E-X10F1-R 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 10mm (0.394") sensing distance and delivers PNP normally-open output in a compact M30 threaded cylinder form factor.

The E2E-X10F1-R 2M is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system continuity, ensure supply chain reliability, and support ongoing maintenance and replacement requirements for installed equipment.

Substiute Parts

E2E-X10F1-R 2M

Omron Automation and SafetyIn Stock: 860E2E-X10F1-R 2M Datasheet

Current PartRFQ

E2E-X10B1D30-R 2M

Omron Automation and SafetyIn Stock: 924E2E-X10B1D30-R 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E2E-X10F1-R 2M are identified based on functional and electrical equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Sensor type (Inductive)
• Sensing distance (10mm)
• Output configuration (PNP-NO, 3-Wire)
• Response frequency (400Hz)
• Supply voltage range (10V ~ 30V)
• Operating temperature range (-40°C ~ 85°C)

Mechanical Compatibility Parameters:

• Package style (Cylinder, Threaded - M30)
• Shielding type (Shielded)
• Body material (Nickel-Plated Brass)
• Ingress protection rating (IP67 minimum)

Compliance Parameters:

• RoHS compliance status

The E2E-X10B1D30-R 2M qualifies as a direct substitute because it maintains all critical electrical and mechanical parameters while offering enhanced product status and expanded environmental ratings.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10B1D30-R 2M is the direct functional equivalent for the obsolete E2E-X10F1-R 2M. Both sensors share identical electrical specifications, mechanical form factors, and environmental ratings.

Product Status Advantage: The E2E-X10B1D30-R 2M carries active product status, ensuring ongoing manufacturer support, availability, and compliance with current regulatory standards. The main part is classified as obsolete, making the substitute the appropriate selection for new installations and long-term system support.

Environmental Rating Enhancement: The substitute part provides dual ingress protection ratings (IP67 and IP69K), exceeding the minimum IP67 requirement of the original part. This enhancement supports deployment in higher-pressure wash-down environments without compromising compatibility.

Termination Consideration: The primary difference between these parts is termination style. The main part features wire leads, while the substitute provides cable leads. This difference requires verification of the connection interface in the target application. Both termination styles deliver equivalent electrical performance and are compatible with standard M30 threaded mounting.

Compliance Status: Both parts maintain RoHS compliance and equivalent moisture sensitivity levels, supporting deployment in regulated industrial environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10B1D30-R 2M directly replace the E2E-X10F1-R 2M in existing installations?

A: Yes. Both sensors maintain identical electrical output characteristics (PNP-NO, 3-Wire), supply voltage range (10V ~ 30V), sensing distance (10mm), and response frequency (400Hz). The M30 threaded cylinder form factor and shielded construction are identical. Verify that the cable lead termination of the substitute is compatible with the connection interface in your application, as the original part uses wire leads.

Q: What is the significance of the different ingress protection ratings?

A: The main part specifies IP67 protection. The substitute provides both IP67 and IP69K ratings. IP69K represents a higher protection level suitable for high-pressure, high-temperature wash-down applications. The substitute's dual rating ensures compatibility with the original IP67 requirement while offering expanded environmental capability.

Q: Are there any compliance or certification differences between these parts?

A: Both parts are RoHS compliant and carry identical moisture sensitivity levels (MSL 1 - Unlimited). The substitute carries ECCN classification EAR99 and HTSUS code 8543.70.9860, supporting international trade and regulatory compliance.

Q: Why is the main part classified as obsolete?

A: Product obsolescence reflects manufacturer discontinuation decisions. The E2E-X10B1D30-R 2M represents the current-generation equivalent within the E2E NEXT series, offering the same functional performance with active production status and ongoing support.

Q: Does the termination style difference affect electrical performance?

A: No. Both wire leads and cable leads deliver equivalent electrical performance. The difference is mechanical and relates to connection methodology. Select based on your application's connector interface requirements.

Q: Can both parts operate across the same temperature range?

A: Yes. Both sensors operate across the identical temperature range of -40°C to 85°C, supporting deployment in equivalent thermal environments.