E2E-X10F1 5M Equivalent & Substitute Parts

Part Overview

The E2E-X10F1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 10mm (0.394") sensing distance and delivers PNP-NO output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure ongoing component availability for new installations and field replacements.

Substiute Parts

E2E-X10F1 5M

Omron Automation and SafetyIn Stock: 1221E2E-X10F1 5M Datasheet

Current PartRFQ

E2E-X10B1D30 5M

Omron Automation and SafetyIn Stock: 1085E2E-X10B1D30 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete E2E-X10F1 5M is determined by strict equivalence across the following critical parameters:

Functional Equivalence Criteria:

• Sensor Type: Inductive
• Sensing Distance: 0.394" (10mm)
• Output Type: PNP-NO, 3-Wire
• Response Frequency: 400Hz
• Shielding: Shielded
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum)
• Package / Case: Cylinder, Threaded - M30
• Material - Body: Nickel-Plated Brass

The E2E-X10B1D30 5M qualifies as a direct substitute based on matching all functional parameters. The primary distinction is the transition from Wire Leads termination to Cable Leads termination and the upgrade from IP67 to IP67/IP69K ingress protection rating. The substitute part belongs to the E2E NEXT series and maintains active product status, ensuring long-term availability and manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10B1D30 5M is the designated substitute for the obsolete E2E-X10F1 5M. Selection of this substitute is supported by the following engineering factors:

Product Status Transition: The main part has reached end-of-life status, while the substitute maintains active product status with ongoing manufacturer support and availability.

Regulatory Compliance: Both parts maintain RoHS Compliant certification, ensuring compatibility with environmental and regulatory requirements across industrial markets.

Functional Continuity: All critical electrical and mechanical parameters remain identical, including sensing distance, output configuration, response frequency, supply voltage range, and operating temperature specifications.

Enhanced Protection Rating: The substitute provides upgraded ingress protection to IP69K in addition to IP67, offering improved environmental sealing without compromising the original IP67 specification.

Termination Consideration: The transition from Wire Leads to Cable Leads represents a packaging enhancement that improves installation flexibility and durability in field applications. This change does not affect electrical performance or functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10B1D30 5M directly replace the E2E-X10F1 5M in existing installations?

A: Yes. The substitute part maintains identical electrical specifications, sensing distance, output type, response frequency, and operating parameters. The M30 threaded cylinder package ensures mechanical compatibility. The transition from Wire Leads to Cable Leads may require connector adaptation depending on the existing installation configuration.

Q: What is the significance of the IP69K rating on the substitute part?

A: The E2E-X10B1D30 5M provides IP69K ingress protection in addition to IP67. This represents an enhanced sealing specification that exceeds the original IP67 requirement, offering superior protection in high-pressure wash and harsh environmental conditions. The original IP67 specification remains fully satisfied.

Q: Are there differences in sensing performance between the two parts?

A: No. Both parts operate with identical sensing distance (10mm), response frequency (400Hz), and shielding configuration. Functional sensing performance is equivalent.

Q: How does the Cable Leads termination differ from Wire Leads?

A: Wire Leads provide direct wire connections, while Cable Leads include an integrated cable assembly. Cable Leads offer improved durability and simplified installation in many industrial applications. The electrical performance and connection methodology remain functionally equivalent.

Q: Is the substitute part available in the same packaging format?

A: The substitute part is supplied in Box packaging, whereas the original part was supplied with standard packaging. Both parts use the identical M30 threaded cylinder mechanical package. The packaging format does not affect component functionality or installation.

Q: Do both parts comply with RoHS requirements?

A: Yes. Both the E2E-X10F1 5M and E2E-X10B1D30 5M maintain RoHS Compliant status, ensuring compatibility with environmental regulations and industry standards.

Q: What is the base product number for the substitute?

A: The base product number for the E2E-X10B1D30 5M is E2E-X10, which identifies the core sensor platform within the E2E NEXT series.