E2E-X10F1 2M Equivalent & Substitute Parts

Part Overview

The E2E-X10F1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor features a 10mm (0.394") sensing distance, PNP-NO output configuration, and M30 threaded cylinder housing with IP67 ingress protection rating.

The E2E-X10F1 2M carries an obsolete product status. Locating equivalent substitute parts is necessary to maintain system continuity, ensure supply chain reliability, and support ongoing maintenance and replacement requirements for installed equipment.

Substiute Parts

E2E-X10F1 2M

Omron Automation and SafetyIn Stock: 1020E2E-X10F1 2M Datasheet

Current PartRFQ

E2E-X10B1D30 2M

Omron Automation and SafetyIn Stock: 1239E2E-X10B1D30 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X10F1 2M is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.394" (10mm)
• Output Type: PNP-NO, 3-Wire
• Response Frequency: 400Hz
• Voltage Supply Range: 10V ~ 30V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case Style: Cylinder, Threaded - M30
• Shielding: Shielded
• Body Material: Nickel-Plated Brass
• RoHS Compliance: RoHS Compliant

The E2E-X10B1D30 2M qualifies as a direct substitute because it maintains equivalence across all mandatory parameters. The substitute part represents an active product from the E2E NEXT series, providing continued availability and supply chain support for applications currently utilizing the obsolete E2E-X10F1 2M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10B1D30 2M is the qualified substitute for the obsolete E2E-X10F1 2M based on the following engineering criteria:

Product Status Alignment: The substitute part maintains active product status within the E2E NEXT series, ensuring long-term availability, technical support, and supply chain continuity compared to the obsolete main part.

Functional Equivalence: Both sensors maintain identical electrical and mechanical specifications across all critical parameters, including sensing distance, output configuration, response frequency, voltage supply range, and operating temperature range.

Compliance Certification: Both parts carry RoHS Compliant status and MSL 1 (Unlimited) moisture sensitivity rating, meeting regulatory and environmental requirements for industrial automation applications.

Enhanced Environmental Protection: The substitute part provides expanded ingress protection with IP69K rating in addition to IP67, offering improved performance in high-pressure wash and harsh environmental conditions.

Termination Consideration: The main part features wire leads termination, while the substitute part uses cable leads termination. This difference requires evaluation of existing wiring harness compatibility and connector interfaces in the target application.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10B1D30 2M directly replace the E2E-X10F1 2M in existing installations?

A: The E2E-X10B1D30 2M provides functional equivalence across all critical electrical and mechanical parameters. However, the termination style differs (cable leads versus wire leads), requiring assessment of connector compatibility and wiring harness integration in the specific application.

Q: What is the primary reason for substitution?

A: The E2E-X10F1 2M carries obsolete product status. The E2E-X10B1D30 2M is an active product offering continued supply availability and manufacturer support.

Q: Are the sensing distances identical between these sensors?

A: Yes. Both sensors provide 0.394" (10mm) sensing distance with identical response frequency of 400Hz.

Q: Do both sensors support the same voltage supply range?

A: Yes. Both sensors operate within the 10V ~ 30V supply voltage range.

Q: What is the difference in ingress protection ratings?

A: The main part provides IP67 protection. The substitute part provides both IP67 and IP69K protection, offering enhanced capability for high-pressure wash applications.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E-X10F1 2M and E2E-X10B1D30 2M carry RoHS Compliant status.

Q: What operating temperature range do these sensors support?

A: Both sensors operate across the -40°C ~ 85°C temperature range.

Q: Is the M30 threaded cylinder housing identical on both sensors?

A: Yes. Both sensors feature identical M30 threaded cylinder housing for mechanical mounting compatibility.