Equivalent & Substitute Parts: E2E-X10E1 2M

Part Overview

The E2E-X10E1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with a 10mm (0.394") sensing distance and delivers NPN-NO output through a 3-wire configuration. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new installations and field replacements.

Substiute Parts

E2E-X10E1 2M

Omron Automation and SafetyIn Stock: 906E2E-X10E1 2M Datasheet

Current PartRFQ

E2E-X10C130 2M

Omron Automation and SafetyIn Stock: 1118E2E-X10C130 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E-X10E1 2M is based on functional and electrical parameter equivalence within the Omron E2E sensor family. The substitute part E2E-X10C130 2M maintains all critical electrical specifications: identical 10mm sensing distance, NPN-NO 3-wire output configuration, 400Hz response frequency, 10V ~ 30V supply voltage range, and -40°C ~ 85°C operating temperature. Both sensors feature identical M30 threaded cylinder mechanical packaging, nickel-plated brass construction, and shielded design. The substitute part extends ingress protection to IP69K while maintaining IP67 compatibility, and represents the active successor within the E2E NEXT series. Termination style differs between wire leads (E2E-X10E1 2M) and cable leads (E2E-X10C130 2M), requiring evaluation of installation requirements.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10C130 2M serves as the direct functional equivalent for the obsolete E2E-X10E1 2M. Selection of the substitute part is supported by the following engineering criteria:

Electrical Compatibility: All electrical parameters remain constant between the two models, including supply voltage range, output configuration, response frequency, and operating temperature limits. Direct signal-level compatibility is established.

Mechanical Compatibility: Both sensors employ identical M30 threaded cylinder packaging and nickel-plated brass construction, ensuring mechanical interchangeability in mounting applications.

Environmental Protection: The substitute part maintains IP67 ingress protection while adding IP69K capability, providing equivalent or enhanced environmental sealing for industrial applications.

Regulatory Compliance: Both parts maintain RoHS compliance status, satisfying regulatory requirements for new equipment design and field replacement applications.

Product Status: The E2E-X10C130 2M holds active product status within the E2E NEXT series, ensuring ongoing availability, technical support, and supply chain continuity.

Termination Consideration: The transition from wire leads to cable leads requires assessment of installation methodology and connector compatibility within the target application.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10C130 2M directly replace the E2E-X10E1 2M in existing installations?

A: Electrical and mechanical compatibility is established through identical sensing distance, output type, voltage supply range, operating temperature, and M30 threaded packaging. Termination style differs (cable leads versus wire leads), requiring evaluation of connection methodology in the specific installation.

Q: What is the primary reason for substitution?

A: The E2E-X10E1 2M is classified as obsolete. The E2E-X10C130 2M is the active equivalent within the E2E NEXT series, providing long-term availability and supply chain continuity.

Q: Are the sensing characteristics identical between these two models?

A: Yes. Both sensors operate at 10mm sensing distance with 400Hz response frequency, NPN-NO 3-wire output, and identical voltage supply parameters (10V ~ 30V).

Q: Does the substitute part offer any performance enhancements?

A: The E2E-X10C130 2M extends ingress protection to IP69K while maintaining IP67 compatibility, providing enhanced environmental sealing capability.

Q: What is the difference in termination style, and does it affect compatibility?

A: The E2E-X10E1 2M uses wire leads for direct connection, while the E2E-X10C130 2M uses cable leads. Installation methodology and connector compatibility must be evaluated for the specific application.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2E-X10E1 2M and E2E-X10C130 2M maintain RoHS compliance status.

Q: What is the operating temperature range for both sensors?

A: Both sensors operate across the identical temperature range of -40°C to 85°C.