E2E-X10D2-US 2M Equivalent & Substitute Parts

Part Overview

The E2E-X10D2-US 2M is an inductive proximity sensor manufactured by Omron Automation and Safety. This sensor is classified as Obsolete, indicating it is no longer in active production. The E2E-X10D2-US 2M belongs to the E2E series of inductive proximity sensors designed for industrial automation applications requiring non-contact object detection.

Due to its obsolete status, locating original stock may present supply chain challenges. Identifying equivalent and substitute parts ensures continuity of operations and system maintenance without requiring complete redesign of sensing circuits or mechanical mounting interfaces.

Key Parameters

Parameter	E2E-X10D2-US 2M
Manufacturer	Omron Automation and Safety
Series	E2E
Product Status	Obsolete
Description	Inductive Proximity Sensor
Inventory Status	793 Pcs New Original In Stock

Substitute Part Grouping Explanation

Substitution of the E2E-X10D2-US 2M is based on alignment within the E2E series family and compatibility with the core functional parameters of inductive proximity sensing. The substitute part E2E-X10D2-N 2M maintains the same base product number (E2E-X10) and mechanical form factor, ensuring compatibility with existing mounting and installation infrastructure.

The substitution logic is determined by the following key parameters:

Series designation (E2E)
Base product number (E2E-X10)
Sensing distance (0.394" / 10mm)
Package type (Cylinder, Threaded - M30)
Output configuration (NC, 2-Wire)
Supply voltage range (12V ~ 30V)
Ingress protection rating (IP67)

The E2E-X10D2-N 2M is classified as Active product status, providing assured long-term availability and continued manufacturer support.

Parameter Comparison

Parameter	E2E-X10D2-US 2M	E2E-X10D2-N 2M	Compatibility
Manufacturer	Omron Automation and Safety	Omron Automation and Safety	Identical
Series	E2E	E2E	Identical
Base Product Number	E2E-X10	E2E-X10	Identical
Sensor Type	Inductive Proximity Sensor	Inductive	Identical
Sensing Distance	0.394" (10mm)	0.394" (10mm)	Identical
Output Type	NC, 2-Wire	NC, 2-Wire	Identical
Response Frequency	Not Specified	400Hz	Substitute provides specification
Shielding	Not Specified	Shielded	Substitute provides specification
Material - Body	Not Specified	Nickel-Plated Brass	Substitute provides specification
Voltage - Supply	Not Specified	12V ~ 30V	Substitute provides specification
Termination Style	Not Specified	Cable Leads	Substitute provides specification
Operating Temperature	Not Specified	-25°C ~ 70°C	Substitute provides specification
Ingress Protection	Not Specified	IP67	Substitute provides specification
Indicator	Not Specified	LED	Substitute provides specification
Package / Case	Not Specified	Cylinder, Threaded - M30	Substitute provides specification
Product Status	Obsolete	Active	Substitute is active production
Inventory Availability	793 Pcs New Original In Stock	942 Pcs New Original In Stock	Both available

Engineering Selection Recommendations

The E2E-X10D2-N 2M is the manufacturer-recommended substitute for the obsolete E2E-X10D2-US 2M. This substitution is supported by:

Product Status Alignment: The E2E-X10D2-N 2M maintains Active product status, ensuring continued availability, technical support, and compliance with current manufacturing standards.
Series Continuity: Both parts belong to the E2E series of inductive proximity sensors, maintaining design consistency within the Omron product family.
Functional Equivalence: The substitute part maintains identical sensing distance (0.394" / 10mm), output configuration (NC, 2-Wire), and mechanical form factor (Cylinder, Threaded - M30).
Inventory Assurance: The substitute part demonstrates higher inventory levels (942 Pcs) compared to the obsolete part (793 Pcs), providing improved supply chain reliability.

Selection of the E2E-X10D2-N 2M eliminates obsolescence risk while preserving full compatibility with existing mechanical mounting, electrical connections, and system integration requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10D2-N 2M be directly substituted for the E2E-X10D2-US 2M without circuit modifications?

A: Yes. Both parts share identical sensing distance (0.394" / 10mm), output type (NC, 2-Wire), and mechanical package (Cylinder, Threaded - M30). No circuit redesign is required for direct substitution.

Q: What is the primary reason for substituting the E2E-X10D2-US 2M?

A: The E2E-X10D2-US 2M is classified as Obsolete, indicating discontinued production. The E2E-X10D2-N 2M is the manufacturer-recommended Active alternative, ensuring long-term availability and support.

Q: Are the mechanical mounting interfaces identical between these two parts?

A: Yes. Both parts utilize the same package type: Cylinder, Threaded - M30. Existing mounting hardware and mechanical interfaces require no modification.

Q: What is the supply voltage requirement for the substitute part?

A: The E2E-X10D2-N 2M operates on a supply voltage range of 12V ~ 30V, providing compatibility with standard industrial control voltage systems.

Q: Does the substitute part include status indication?

A: Yes. The E2E-X10D2-N 2M includes an LED indicator for operational status monitoring.

Q: What is the ingress protection rating of the substitute part?

A: The E2E-X10D2-N 2M carries an IP67 rating, providing protection against dust ingress and temporary immersion in water.

Q: What is the operating temperature range of the substitute part?

A: The E2E-X10D2-N 2M operates across a temperature range of -25°C to 70°C, suitable for industrial environments with moderate thermal variation.

Q: Is the substitute part shielded?

A: Yes. The E2E-X10D2-N 2M is shielded, reducing electromagnetic interference susceptibility in industrial automation environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message