E2E2-X5C2 Inductive Proximity Sensor Equivalent & Substitute Parts

Part Overview

The E2E2-X5C2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection applications with a 5mm sensing distance. This sensor operates as an NPN normally-closed (NC) output device with a 3-wire configuration and is housed in a cylindrical M18 threaded package.

The E2E2-X5C2 is classified as obsolete. Locating equivalent or substitute components becomes necessary when original stock is depleted or when system redesigns require active product lines with extended manufacturer support and availability.

Substiute Parts

E2E2-X5C2

Omron Automation and SafetyIn Stock: 1214E2E2-X5C2 Datasheet

Current PartRFQ

E2E-X5C2L18 2M

Omron Automation and SafetyIn Stock: 896E2E-X5C2L18 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X5C2L18 2M qualifies as a direct substitute based on the following critical parameters that determine functional compatibility:

• Sensor Type: Both are inductive proximity sensors
• Sensing Distance: Both operate at 0.197" (5mm)
• Output Type: Both provide NPN-NC, 3-Wire configuration
• Response Frequency: Both support 600Hz
• Shielding: Both are shielded designs
• Material - Body: Both use Nickel-Plated Brass construction
• Termination Style: Both use Cable Leads
• Operating Temperature: Both support -40°C ~ 85°C range
• Ingress Protection: Both meet IP67 minimum (substitute also supports IP69K)
• Indicator: Both include LED indication
• Package / Case: Both use Cylinder, Threaded - M18 form factor
• RoHS Status: Both are RoHS Compliant

The substitute part operates within a reduced supply voltage range (10V ~ 30V versus 10V ~ 55V on the original). This represents a functional constraint that must be evaluated against the application's actual voltage requirements.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5C2L18 2M is an active product from the E2E NEXT series and represents the current generation equivalent to the obsolete E2E2-X5C2. Both components are RoHS Compliant and carry identical ECCN and HTSUS classifications, ensuring regulatory consistency.

The primary consideration for substitution is the supply voltage specification. The original E2E2-X5C2 accepts 10V ~ 55V, while the E2E-X5C2L18 2M operates within 10V ~ 30V. Applications requiring supply voltages above 30V are incompatible with the substitute part. For applications operating within the 10V ~ 30V range, the substitute provides enhanced ingress protection (IP69K in addition to IP67) and active manufacturer support.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5C2L18 2M directly replace the E2E2-X5C2 in all applications?

A: Direct replacement is possible only when the application supply voltage does not exceed 30V. The substitute part's maximum supply voltage is 30V, compared to 55V for the original. Verify your system voltage before substitution.

Q: Are the mechanical dimensions and M18 threading identical between these parts?

A: Both sensors use identical Cylinder, Threaded - M18 packaging. Mechanical mounting compatibility is maintained.

Q: What is the difference between the E2E and E2E NEXT series?

A: The E2E-X5C2L18 2M belongs to the E2E NEXT series, which represents the current active product line. The original E2E2-X5C2 is from the legacy E2E series and is classified as obsolete.

Q: Do both sensors provide the same sensing distance and response characteristics?

A: Yes. Both sensors operate at 0.197" (5mm) sensing distance with 600Hz response frequency, shielded construction, and NPN-NC 3-wire output configuration.

Q: Are there any compliance or certification differences?

A: Both parts are RoHS Compliant with identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications. No compliance differences exist between the two components.