Omron E2E2-X5B2 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E2-X5B2 is a cylindrical inductive proximity sensor with a 5mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor operates with PNP-NC output configuration and is housed in an M18 threaded cylinder package with shielded construction.

The E2E2-X5B2 carries an Obsolete product status. Locating equivalent or substitute components is necessary to maintain system continuity, ensure supply chain reliability, and support ongoing maintenance and replacement requirements in deployed applications.

Substiute Parts

E2E2-X5B2

Omron Automation and SafetyIn Stock: 1070E2E2-X5B2 Datasheet

Current PartRFQ

E2E-X5B2L18 2M

Omron Automation and SafetyIn Stock: 949E2E-X5B2L18 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the E2E2-X5B2 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive (detection principle must remain unchanged)
• Sensing Distance: 0.197" (5mm) (detection range must be identical)
• Output Type: PNP-NC, 3-Wire (electrical interface configuration must match)
• Response Frequency: 600Hz (switching speed must be equivalent)
• Shielding: Shielded (electromagnetic interference protection must be maintained)
• Material - Body: Nickel-Plated Brass (material composition must be consistent)
• Termination Style: Cable Leads (connection method must be compatible)
• Operating Temperature: -40°C ~ 85°C (thermal operating range must be supported)
• Ingress Protection: IP67 minimum (environmental sealing must meet or exceed specification)
• Package / Case: Cylinder, Threaded - M18 (mechanical form factor and mounting must be identical)

The substitute part E2E-X5B2L18 2M meets all critical substitution criteria while offering enhanced product status and extended environmental certifications.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X5B2L18 2M is the manufacturer-recommended substitute for the obsolete E2E2-X5B2. This substitute maintains functional and mechanical equivalence across all critical detection and interface parameters.

The substitute part carries Active product status, ensuring ongoing availability, technical support, and supply chain continuity. Both parts maintain RoHS compliance and equivalent regulatory certifications (ECCN: EAR99; HTSUS: 8543.70.9860).

The substitute offers enhanced environmental protection with dual IP67/IP69K ingress protection ratings, providing extended capability for high-pressure wash and harsh environment applications. The supply voltage range of the substitute (10V ~ 30V) is a subset of the original part specification (10V ~ 55V); applications operating above 30V require verification of actual system supply voltage before substitution.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X5B2L18 2M be used as a direct replacement for the E2E2-X5B2?

A: Yes. The substitute maintains identical sensing distance, output type, response frequency, shielding, body material, termination style, operating temperature range, and M18 mechanical form factor. All critical substitution parameters align with the original specification.

Q: What is the difference in voltage supply range between these parts?

A: The E2E2-X5B2 operates from 10V to 55V, while the E2E-X5B2L18 2M operates from 10V to 30V. If your application requires supply voltages above 30V, verify the actual system voltage before substitution. Most industrial 24VDC applications fall within the substitute's operating range.

Q: Does the substitute offer any performance improvements?

A: The E2E-X5B2L18 2M maintains identical electrical and detection performance. The substitute adds IP69K ingress protection capability in addition to the base IP67 rating, providing enhanced environmental sealing for high-pressure wash applications.

Q: Why is the original E2E2-X5B2 marked as Obsolete?

A: The E2E2-X5B2 has been superseded by the E2E-X5B2L18 2M within Omron's product line. The substitute represents the current production equivalent and is the recommended replacement for new designs and ongoing maintenance.

Q: Are there any mechanical or electrical interface changes?

A: No. Both parts use identical M18 threaded cylinder packaging, cable lead termination, and PNP-NC 3-wire output configuration. No wiring or mechanical modifications are required for substitution.

Q: What is the inventory status of these parts?

A: The E2E2-X5B2 has 979 pieces in stock (Obsolete status). The E2E-X5B2L18 2M has 908 pieces in stock (Active status). The substitute is the recommended choice for new orders and long-term supply assurance.