Equivalent & Substitute Parts for E2E2-X2C2-M1

Part Overview

The E2E2-X2C2-M1 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor features a 2mm sensing distance, NPN-NC output configuration, and M12 threaded cylindrical housing with IP67 ingress protection. The product is classified as obsolete, making identification of compatible substitute parts essential for system maintenance and component procurement.

Substiute Parts

E2E2-X2C2-M1

Omron Automation and SafetyIn Stock: 758E2E2-X2C2-M1 Datasheet

Current PartRFQ

E2E-X2C2L12-M1

Omron Automation and SafetyIn Stock: 955E2E-X2C2L12-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X2C2L12-M1 qualifies as a direct substitute for the E2E2-X2C2-M1 based on the following critical parameters:

Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.079" (2mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 1.5kHz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Connector
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Cylinder, Threaded - M12
• RoHS Status: RoHS Compliant

Operational Difference: The substitute part operates within a reduced supply voltage range (10V ~ 30V) compared to the original part (10V ~ 55V). The substitute additionally supports IP69K ingress protection in addition to IP67. Both sensors belong to the E2E product family and share identical functional specifications for sensing distance, output configuration, and response characteristics.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2C2L12-M1 is the designated substitute for the obsolete E2E2-X2C2-M1. Both components maintain identical sensing distance, output configuration, response frequency, and mechanical form factor. The substitute part carries active product status from Omron Automation and Safety, ensuring ongoing availability and support.

Selection of the E2E-X2C2L12-M1 is appropriate when the system supply voltage operates within the 10V ~ 30V range. Systems requiring supply voltages above 30V must evaluate alternative solutions, as the substitute part does not support the full voltage range of the original component. Both parts maintain RoHS compliance and equivalent environmental ratings for industrial deployment.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2C2L12-M1 directly replace the E2E2-X2C2-M1 in existing installations?

A: Direct replacement is possible when system supply voltage remains within 10V ~ 30V. The substitute maintains identical sensing distance (2mm), output type (NPN-NC, 3-Wire), response frequency (1.5kHz), and M12 connector interface. Verify supply voltage compatibility before installation.

Q: What is the primary difference between these two sensors?

A: The E2E-X2C2L12-M1 operates within a reduced supply voltage range (10V ~ 30V) compared to the original E2E2-X2C2-M1 (10V ~ 55V). All other functional and mechanical specifications remain identical.

Q: Are both sensors mechanically compatible with M12 threaded installations?

A: Yes. Both sensors feature identical M12 threaded cylindrical housing and connector termination style, ensuring mechanical compatibility with existing M12 mounting infrastructure.

Q: What ingress protection ratings apply to each sensor?

A: The E2E2-X2C2-M1 provides IP67 protection. The E2E-X2C2L12-M1 provides both IP67 and IP69K protection, offering enhanced sealing capability for high-pressure wash environments.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E2-X2C2-M1 and E2E-X2C2L12-M1 maintain RoHS compliance status.