Equivalent & Substitute Parts for E2E2-X2C2

Part Overview

The E2E2-X2C2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact detection applications with a 2mm sensing distance. This sensor features NPN-NC output configuration, operates across a wide voltage range of 10V to 55V, and is housed in a shielded M12 cylindrical package with IP67 ingress protection.

The E2E2-X2C2 is classified as obsolete. Locating equivalent or substitute components is necessary to support legacy system maintenance, ensure continued operational reliability, and facilitate component procurement for repair and replacement applications.

Substiute Parts

E2E2-X2C2

Omron Automation and SafetyIn Stock: 731E2E2-X2C2 Datasheet

Current PartRFQ

E2E-X2C2L12 2M

Omron Automation and SafetyIn Stock: 1164E2E-X2C2L12 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E2-X2C2 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.079" (2mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 1.5kHz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 minimum
• Package / Case: Cylinder, Threaded - M12
• RoHS Status: RoHS Compliant

The E2E-X2C2L12 2M meets all substitution criteria. This part belongs to the E2E NEXT series and maintains functional and mechanical compatibility with the original E2E2-X2C2 while offering active product status and enhanced ingress protection rating.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X2C2L12 2M is a direct functional substitute for the E2E2-X2C2. Both components share identical sensor type, sensing distance, output configuration, response frequency, shielding, body material, termination style, operating temperature range, and mechanical package specifications.

The substitute part offers the advantage of active product status, ensuring continued availability and manufacturing support. The E2E-X2C2L12 2M provides enhanced ingress protection with IP69K rating in addition to IP67 compliance, maintaining or exceeding the environmental sealing of the original component.

The voltage supply range of the substitute is narrower (10V ~ 30V versus 10V ~ 55V). Applications operating within the 10V to 30V range will experience full compatibility. Systems requiring operation above 30V will require circuit redesign or alternative component selection.

Both components maintain RoHS compliance and identical ECCN and HTSUS classifications, supporting regulatory and trade compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X2C2L12 2M directly replace the E2E2-X2C2 in all applications?

A: Direct replacement is possible for applications operating within the 10V to 30V supply voltage range. The substitute maintains identical sensing distance, output type, response frequency, operating temperature, and mechanical package specifications. Applications requiring supply voltages above 30V require alternative component selection or circuit modification.

Q: What is the difference between the E2E and E2E NEXT series?

A: The E2E-X2C2L12 2M belongs to the E2E NEXT series, representing an updated product line from Omron. Both series share the same base product number (E2E-X2) and maintain functional compatibility. The NEXT series designation indicates active manufacturing status and enhanced specifications, including improved ingress protection ratings.

Q: Are the M12 connectors identical between the two parts?

A: Both components use identical Cylinder, Threaded - M12 mechanical packages. Physical installation and connector compatibility are equivalent.

Q: What does the "L12 2M" designation in the substitute part number indicate?

A: The "L12 2M" suffix specifies the cable lead configuration and length. This designation is part of the complete part number structure for the E2E NEXT series and defines the specific termination variant.

Q: Are there any compliance or certification differences?

A: Both components are RoHS Compliant and share identical ECCN (EAR99) and HTSUS (8543.70.9860) classifications. No compliance or certification differences exist between the original and substitute parts.