E2E2-X10MC2 Proximity Sensor Equivalent & Substitute Parts

Part Overview

The E2E2-X10MC2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for M18 threaded mounting with 10mm sensing distance and NPN-NC output configuration. This model is classified as obsolete, making identification of functionally equivalent active alternatives necessary for ongoing system maintenance and new design implementations. The sensor operates in unshielded configuration suitable for general industrial proximity detection applications.

Substiute Parts

E2E2-X10MC2

Omron Automation and SafetyIn Stock: 1164E2E2-X10MC2 Datasheet

Current PartRFQ

E2E-X10MC2L18 2M

Omron Automation and SafetyIn Stock: 768E2E-X10MC2L18 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X10MC2L18 2M qualifies as a direct substitute based on the following critical parameters:

• Identical sensor type: Inductive proximity detection
• Matching sensing distance: 10mm (0.394")
• Identical output configuration: NPN-NC, 3-Wire
• Identical package form factor: Cylinder, Threaded - M18
• Matching shielding specification: Unshielded
• Same manufacturer: Omron Automation and Safety
• Equivalent electrical supply range: 10V ~ 30V
• Matching RoHS compliance and MSL rating

The E2E-X10MC2L18 2M belongs to the E2E NEXT series and maintains active product status, providing long-term availability and supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MC2L18 2M is the designated substitute for the obsolete E2E2-X10MC2. Selection is based on:

• Functional equivalence across all critical electrical and mechanical parameters
• Active product status ensuring availability and manufacturer support
• Maintained RoHS compliance and MSL rating consistency
• Same base product number (E2E-X10) indicating design lineage within the Omron product family
• Transition to E2E NEXT series representing current generation technology

Direct replacement is appropriate for applications requiring identical sensing distance, output type, and M18 threaded mounting configuration.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MC2L18 2M directly replace the E2E2-X10MC2 in existing installations?

A: Yes. Both sensors share identical sensing distance (10mm), output configuration (NPN-NC, 3-Wire), package form factor (M18 threaded cylinder), and shielding specification (unshielded). Electrical and mechanical compatibility is maintained.

Q: What is the primary reason for substitution?

A: The E2E2-X10MC2 is classified as obsolete. The E2E-X10MC2L18 2M is the active equivalent within the Omron product line, providing continuity for maintenance and new designs.

Q: Are there differences in operating specifications between these models?

A: The E2E-X10MC2L18 2M provides documented specifications including supply voltage range (10V ~ 30V), operating temperature (-40°C ~ 85°C), response frequency (400Hz), and ingress protection rating (IP67, IP69K). The original E2E2-X10MC2 documentation does not include these detailed specifications, though functional parameters remain equivalent.

Q: Does the cable lead termination style affect compatibility?

A: The E2E-X10MC2L18 2M uses cable leads for termination. Verify that existing wiring harnesses and connector interfaces are compatible with this termination method before implementation.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2E2-X10MC2 and E2E-X10MC2L18 2M maintain RoHS compliance and MSL rating 1 (unlimited moisture sensitivity level).