Omron E2E2-X10MB2 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E2-X10MB2 is an inductive proximity sensor with a 10mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor operates as a PNP-NC (normally closed) device with a 3-wire configuration and is housed in an M18 cylindrical threaded package.

The E2E2-X10MB2 is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system functionality in applications where this sensor is currently deployed or where design continuity is required.

Substiute Parts

E2E2-X10MB2

Omron Automation and SafetyIn Stock: 791E2E2-X10MB2 Datasheet

Current PartRFQ

E2E-X10MB2L18 2M

Omron Automation and SafetyIn Stock: 1017E2E-X10MB2L18 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2E2-X10MB2 is determined by the following critical parameters that must remain consistent:

• Sensor Type: Inductive (non-contact detection principle)
• Sensing Distance: 0.394" (10mm) (detection range requirement)
• Output Type: PNP-NC, 3-Wire (signal logic and wiring configuration)
• Package / Case: Cylinder, Threaded - M18 (mechanical form factor and mounting)
• Voltage Supply Range: Compatibility with existing power supply (10V ~ 55V for the original)
• Operating Temperature: -40°C ~ 85°C (environmental operating range)
• Ingress Protection: IP67 minimum (environmental sealing requirement)
• Termination Style: Cable Leads (connection method)

The E2E-X10MB2L18 2M qualifies as a manufacturer-recommended substitute because it maintains all critical parameters while offering enhanced specifications in response frequency and expanded ingress protection ratings.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10MB2L18 2M is the manufacturer-recommended substitute for the obsolete E2E2-X10MB2. Both sensors maintain identical core functional parameters: inductive sensing principle, 10mm detection distance, PNP-NC output configuration, M18 cylindrical package, and operating temperature range.

The substitute part is classified as Active product status, ensuring ongoing availability and supply chain continuity. Both components are RoHS Compliant, meeting regulatory requirements for hazardous substance restrictions.

The E2E-X10MB2L18 2M offers enhanced response frequency (400Hz versus 200Hz) and expanded ingress protection certification (IP67 and IP69K versus IP67 only). The substitute operates within a narrower voltage supply range (10V ~ 30V versus 10V ~ 55V); applications requiring the full 55V upper limit of the original part require evaluation of actual system voltage requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10MB2L18 2M directly replace the E2E2-X10MB2 in existing installations?

A: Yes, for applications operating within the 10V ~ 30V supply range. The substitute maintains identical sensing distance, output type, package form factor, and operating temperature range. Applications requiring supply voltages above 30V require alternative solutions.

Q: What is the significance of the response frequency difference (200Hz to 400Hz)?

A: Response frequency defines the maximum switching speed of the sensor. The substitute's 400Hz response frequency supports faster detection cycles. Applications with slower detection requirements are unaffected by this enhancement.

Q: Does the M18 threaded package remain the same between both parts?

A: Yes. Both the E2E2-X10MB2 and E2E-X10MB2L18 2M use identical M18 cylindrical threaded packaging, ensuring mechanical compatibility in existing mounting configurations.

Q: What does the expanded IP69K rating on the substitute part provide?

A: IP69K represents enhanced protection against high-pressure water jets and steam cleaning. The original E2E2-X10MB2 carries IP67 rating (immersion to 1 meter). The substitute's additional IP69K certification supports more demanding washdown and high-pressure cleaning environments.

Q: Are both parts RoHS Compliant?

A: Yes. Both the E2E2-X10MB2 and E2E-X10MB2L18 2M are RoHS Compliant, meeting regulatory requirements for restricted hazardous substances in electrical and electronic equipment.

Q: What is the cable lead termination configuration?

A: Both sensors use cable leads as the termination method. The specific cable length and connector type should be verified against application requirements and existing system documentation.