Omron E2E2-X10C2 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E2-X10C2 is a cylindrical inductive proximity sensor with M30 threaded mounting, designed for non-contact detection applications requiring a 10mm sensing distance. This sensor operates as an NPN-NC (normally closed) 3-wire output device with shielded construction and IP67 ingress protection. The E2E2-X10C2 is classified as obsolete, making identification of functionally equivalent active alternatives essential for new designs and system maintenance.

Substiute Parts

E2E2-X10C2

Omron Automation and SafetyIn Stock: 843E2E2-X10C2 Datasheet

Current PartRFQ

E2E-X10C2L30 2M

Omron Automation and SafetyIn Stock: 828E2E-X10C2L30 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E2-X10C2 has been superseded by the E2E-X10C2L30 2M from the E2E NEXT series. Substitution is valid based on the following critical parameters that remain constant:

• Sensor Type: Inductive
• Sensing Distance: 0.394" (10mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 400Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 (substitute adds IP69K)
• Indicator: LED
• Package / Case: Cylinder, Threaded - M30
• RoHS Status: RoHS Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute part operates within a narrower supply voltage range (10V ~ 30V versus 10V ~ 55V) and represents an active product with enhanced environmental protection ratings.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10C2L30 2M is the direct active equivalent for the obsolete E2E2-X10C2. Both parts maintain identical functional specifications for sensing distance, output configuration, response characteristics, and environmental ratings. The substitute part is from the E2E NEXT series, representing the current generation of this product line.

Selection of the E2E-X10C2L30 2M is appropriate for applications where the supply voltage requirement does not exceed 30V. Systems currently operating the E2E2-X10C2 at voltages above 30V require circuit redesign or alternative component selection.

Both parts carry RoHS compliance and identical moisture sensitivity ratings, ensuring regulatory and reliability consistency in replacement scenarios.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10C2L30 2M directly replace the E2E2-X10C2 in existing installations?

A: Direct mechanical and electrical replacement is possible when the system supply voltage does not exceed 30V. The E2E2-X10C2 operates up to 55V, while the substitute is rated to 30V maximum. Verify your system voltage before substitution.

Q: What is the difference between the E2E and E2E NEXT series?

A: The E2E NEXT series represents the current generation of Omron inductive proximity sensors. The E2E2-X10C2 belongs to the legacy E2E series, which is now obsolete. The E2E-X10C2L30 2M provides equivalent functionality with active product support and availability.

Q: Are the M30 threaded mounting dimensions identical between both parts?

A: Yes. Both the E2E2-X10C2 and E2E-X10C2L30 2M use M30 threaded cylindrical packages, ensuring mechanical interchangeability in mounting applications.

Q: Does the substitute part offer improved environmental protection?

A: The E2E-X10C2L30 2M adds IP69K rating in addition to IP67, providing enhanced protection against high-pressure water jets. The E2E2-X10C2 is rated IP67 only. Both meet standard industrial ingress protection requirements.

Q: Are cable lead terminations identical on both parts?

A: Yes. Both parts use cable leads for termination, maintaining consistent wiring and connector compatibility.

Q: What is the significance of the "L30" designation in the substitute part number?

A: The "L30" in E2E-X10C2L30 2M indicates the maximum supply voltage rating of 30V, distinguishing it from other variants in the E2E NEXT series with different voltage specifications.