Omron E2E2-X10C1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2E2-X10C1 is a cylindrical inductive proximity sensor with M30 threaded mounting, designed for non-contact detection applications requiring a 10mm sensing distance. This sensor operates as an NPN normally-open switch with 3-wire configuration and is rated for industrial environments with IP67 ingress protection.

The E2E2-X10C1 is classified as obsolete. Locating equivalent or substitute components is necessary to maintain system compatibility and ensure continued availability for replacement or new installations.

Substiute Parts

E2E2-X10C1

Omron Automation and SafetyIn Stock: 738E2E2-X10C1 Datasheet

Current PartRFQ

E2E-X10C1L30 2M

Omron Automation and SafetyIn Stock: 937E2E-X10C1L30 2M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete E2E2-X10C1 is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.394" (10mm)
• Output Type: NPN-NO, 3-Wire
• Response Frequency: 400Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• Operating Temperature: -40°C ~ 85°C
• Ingress Protection: IP67 (minimum)
• Package / Case: Cylinder, Threaded - M30
• RoHS Status: RoHS Compliant

The substitute part E2E-X10C1L30 2M meets all critical functional and mechanical parameters. The voltage supply range differs (10V ~ 30V versus 10V ~ 55V on the original), representing a narrower operating window. The substitute offers enhanced ingress protection (IP67, IP69K) and belongs to the active E2E NEXT series, ensuring long-term availability and support.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X10C1L30 2M is the manufacturer-recommended substitute for the obsolete E2E2-X10C1. Both components are RoHS compliant and share identical mechanical mounting (M30 threaded cylinder), electrical output configuration (NPN-NO, 3-Wire), and sensing performance (10mm distance, 400Hz response).

The substitute belongs to the active E2E NEXT series, ensuring ongoing manufacturer support, documentation availability, and supply chain continuity. The voltage supply specification of the substitute (10V ~ 30V) is narrower than the original (10V ~ 55V); applications operating above 30V require circuit redesign or alternative component selection. The enhanced ingress protection rating (IP69K) of the substitute provides additional environmental sealing capability.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X10C1L30 2M directly replace the E2E2-X10C1 in existing installations?

A: Direct mechanical and electrical replacement is possible for applications operating within the 10V ~ 30V supply range. The M30 threaded mounting, cable lead termination, and NPN-NO output configuration are identical. Applications requiring supply voltages above 30V require alternative component selection or circuit modification.

Q: What is the primary difference between these two sensors?

A: The primary difference is the supply voltage range. The E2E2-X10C1 operates from 10V ~ 55V, while the E2E-X10C1L30 2M operates from 10V ~ 30V. All other functional parameters—sensing distance, output type, response frequency, and mechanical form factor—are identical.

Q: Why is the E2E2-X10C1 classified as obsolete?

A: The E2E2-X10C1 has been superseded by the E2E NEXT series. Omron has transitioned product lines to the newer E2E NEXT generation, which includes the E2E-X10C1L30 2M. The obsolete designation indicates that the original part is no longer in active production.

Q: Are there any compatibility concerns with the M30 threaded mounting?

A: No. Both sensors use identical M30 threaded cylinder packaging. Mechanical mounting, thread pitch, and installation procedures are compatible.

Q: Does the substitute offer any performance improvements?

A: The E2E-X10C1L30 2M maintains identical sensing performance (10mm distance, 400Hz response frequency) and adds enhanced ingress protection capability (IP69K in addition to IP67). This provides superior environmental sealing for high-pressure wash or submersion applications.