E2A-M30LS15-WP-C2 5M Equivalent & Substitute Parts

Part Overview

The E2A-M30LS15-WP-C2 5M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring reliable object detection at 15mm sensing distance. This sensor features NPN-NC output configuration with 3-wire termination and operates across a wide voltage range of 10V to 32V. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new installations and maintenance applications.

Substiute Parts

E2A-M30LS15-WP-C2 5M

Omron Automation and SafetyIn Stock: 1154E2A-M30LS15-WP-C2 5M Datasheet

Current PartRFQ

E2E-X15C2L30 5M

Omron Automation and SafetyIn Stock: 917E2E-X15C2L30 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2A-M30LS15-WP-C2 5M is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.591" (15mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 250Hz
• Package / Case: Cylinder, Threaded - M30
• Termination Style: Cable Leads
• Shielding: Shielded
• Ingress Protection: IP67, IP69K

Allowable Variation Parameters:

• Voltage - Supply: Substitute must support the minimum 10V requirement; higher maximum voltage ratings are acceptable
• Operating Temperature: Substitute must support the minimum -25°C requirement; the original -40°C lower limit is not required for equivalence
• Material - Body: Nickel-Plated Brass specification is maintained
• RoHS Status: RoHS Compliant status is maintained

The E2E-X15C2L30 5M meets all mandatory matching parameters and allowable variation criteria, establishing it as a direct functional equivalent despite the obsolete status of the original part.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X15C2L30 5M is the direct equivalent substitute for the obsolete E2A-M30LS15-WP-C2 5M. Selection of this substitute is supported by the following engineering criteria:

Product Status: The E2E-X15C2L30 5M carries Active product status, ensuring ongoing manufacturer support, availability, and compliance with current regulatory standards. The original E2A-M30LS15-WP-C2 5M is classified as Obsolete, creating supply chain risk and limiting access to technical documentation and support.

Regulatory Compliance: Both parts maintain RoHS Compliant certification, satisfying environmental and regulatory requirements for industrial automation applications.

Functional Equivalence: All critical electrical and mechanical parameters align between the two models, enabling direct substitution without circuit redesign or mechanical modification.

Voltage and Temperature Considerations: The E2E-X15C2L30 5M operates within a voltage range of 10V to 30V, which encompasses the minimum 10V requirement of the original specification. The operating temperature range of -25°C to 70°C is suitable for standard industrial environments; applications requiring operation below -25°C must be evaluated separately.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X15C2L30 5M be used as a direct replacement for the E2A-M30LS15-WP-C2 5M?

A: Yes. The E2E-X15C2L30 5M is a direct functional equivalent. Both sensors share identical sensing distance (15mm), output type (NPN-NC, 3-Wire), response frequency (250Hz), package configuration (M30 threaded cylinder), and ingress protection ratings (IP67, IP69K). No circuit modifications or mechanical changes are required.

Q: What are the differences between these two models?

A: The primary differences are product status and operating specifications. The E2E-X15C2L30 5M is an active product with a supply voltage range of 10V to 30V and operating temperature range of -25°C to 70°C. The E2A-M30LS15-WP-C2 5M is obsolete with a supply voltage range of 10V to 32V and operating temperature range of -40°C to 70°C. For applications operating above 30V or below -25°C, compatibility must be verified against actual system requirements.

Q: Are there any mechanical compatibility concerns?

A: No. Both sensors use identical M30 threaded cylinder packaging with cable lead termination. Mounting, installation, and connector compatibility are identical.

Q: What is the inventory status of the substitute part?

A: The E2E-X15C2L30 5M has 833 pieces in stock as new original inventory, ensuring immediate availability for procurement.

Q: Are both parts RoHS compliant?

A: Yes. Both the E2A-M30LS15-WP-C2 5M and E2E-X15C2L30 5M are RoHS Compliant, meeting environmental and regulatory requirements for industrial applications.