E2A-M30LS15-WP-C2 2M Equivalent & Substitute Parts

Part Overview

The E2A-M30LS15-WP-C2 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring reliable object detection at 15mm sensing distance. This sensor features NPN-NC output configuration with 3-wire termination and operates across a wide voltage range of 10V to 32V.

The E2A-M30LS15-WP-C2 2M is classified as obsolete. Finding equivalent substitute parts is necessary to ensure continued availability for system maintenance, replacement, and new installations where legacy component compatibility is required.

Substiute Parts

E2A-M30LS15-WP-C2 2M

Omron Automation and SafetyIn Stock: 886E2A-M30LS15-WP-C2 2M Datasheet

Current PartRFQ

E2E-X15C2L30 2M

Omron Automation and SafetyIn Stock: 1216E2E-X15C2L30 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the E2A-M30LS15-WP-C2 2M is determined by the following critical parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.591" (15mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 250Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Package / Case: Cylinder, Threaded - M30
• Ingress Protection: IP67, IP69K
• Termination Style: Cable Leads

The E2E-X15C2L30 2M qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. The E2E-X15C2L30 2M belongs to the E2E NEXT series and maintains functional equivalence with the obsolete E2A model while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X15C2L30 2M is the qualified substitute for the obsolete E2A-M30LS15-WP-C2 2M. Both sensors maintain identical electrical and mechanical specifications across all critical parameters including sensing distance, output configuration, response frequency, and ingress protection ratings.

The E2E-X15C2L30 2M carries active product status, ensuring long-term availability and supply chain continuity. Both parts are RoHS compliant and carry equivalent regulatory certifications (ECCN: EAR99, HTSUS: 8543.70.9860).

Minor operational differences exist in voltage supply range (E2E-X15C2L30 2M: 10V ~ 30V versus E2A-M30LS15-WP-C2 2M: 10V ~ 32V) and operating temperature lower limit (E2E-X15C2L30 2M: -25°C versus E2A-M30LS15-WP-C2 2M: -40°C). These differences are application-dependent and should be evaluated against specific system requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X15C2L30 2M directly replace the E2A-M30LS15-WP-C2 2M in existing installations?

A: Yes. Both sensors share identical sensing distance (15mm), output type (NPN-NC, 3-Wire), response frequency (250Hz), shielding configuration, body material, M30 threaded package, and ingress protection ratings (IP67, IP69K). Direct mechanical and electrical substitution is supported.

Q: What are the differences between these two sensors?

A: The primary differences are product status (E2A is obsolete; E2E-X15C2L30 is active), voltage supply range (E2A: 10V ~ 32V; E2E-X15C2L30: 10V ~ 30V), and operating temperature lower limit (E2A: -40°C; E2E-X15C2L30: -25°C). The E2E-X15C2L30 2M belongs to the newer E2E NEXT series.

Q: Are there any wiring or configuration changes required when switching from E2A-M30LS15-WP-C2 2M to E2E-X15C2L30 2M?

A: No. Both sensors use identical 3-wire cable lead termination and NPN-NC output configuration. No rewiring or reconfiguration is necessary.

Q: What is the voltage supply compatibility range for both sensors?

A: The E2A-M30LS15-WP-C2 2M operates at 10V ~ 32V. The E2E-X15C2L30 2M operates at 10V ~ 30V. If your system operates above 30V, the E2A model specifications must be maintained.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2A-M30LS15-WP-C2 2M and E2E-X15C2L30 2M are RoHS compliant with identical regulatory classifications (ECCN: EAR99, HTSUS: 8543.70.9860).