E2A-M18LS08-WA-B1 5M Equivalent & Substitute Parts

Part Overview

The E2A-M18LS08-WA-B1 5M is an inductive proximity sensor manufactured by Omron Automation and Safety. This sensor operates as a shielded, M18 threaded cylinder with PNP normally-open output configuration, designed for industrial automation applications requiring non-contact object detection at 8mm sensing distance. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system functionality and ensure continued availability for replacement and new installations.

Substiute Parts

E2A-M18LS08-WA-B1 5M

Omron Automation and SafetyIn Stock: 1199E2A-M18LS08-WA-B1 5M Datasheet

Current PartRFQ

E2E-X8B1DL18 5M

Omron Automation and SafetyIn Stock: 843E2E-X8B1DL18 5M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X8B1DL18 5M qualifies as a direct substitute for the E2A-M18LS08-WA-B1 5M based on alignment of critical electrical and mechanical parameters. Substitution eligibility is determined by the following parameters:

Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.315" (8mm)
• Output Type: PNP-NO, 3-Wire
• Response Frequency: 500Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Cable Leads
• Ingress Protection: IP67, IP69K
• Indicator: LED
• Package / Case: Cylinder, Threaded - M18
• RoHS Status: RoHS Compliant

Variance Parameters:

• Voltage - Supply: E2A-M18LS08-WA-B1 5M operates 10V ~ 32V; E2E-X8B1DL18 5M operates 10V ~ 30V
• Operating Temperature: E2A-M18LS08-WA-B1 5M operates -40°C ~ 70°C; E2E-X8B1DL18 5M operates -25°C ~ 70°C
• Product Status: E2A-M18LS08-WA-B1 5M is obsolete; E2E-X8B1DL18 5M is active

The E2E-X8B1DL18 5M represents the active successor within the Omron inductive proximity sensor portfolio, belonging to the E2E NEXT series.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X8B1DL18 5M is the designated active equivalent for the obsolete E2A-M18LS08-WA-B1 5M. Selection of the E2E-X8B1DL18 5M is appropriate for applications where:

• Supply voltage remains within the 10V ~ 30V operating range
• Operating temperature requirements fall within -25°C ~ 70°C
• All other electrical and mechanical specifications align with the parameter comparison table

The E2E-X8B1DL18 5M maintains RoHS compliance and carries active product status with current manufacturing support from Omron Automation and Safety. The substitute part belongs to the E2E NEXT series, representing the current generation of Omron M18 inductive proximity sensors with 8mm sensing distance and PNP-NO output configuration.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X8B1DL18 5M directly replace the E2A-M18LS08-WA-B1 5M in existing installations?

A: Direct replacement is possible when the application operates within the E2E-X8B1DL18 5M voltage range (10V ~ 30V) and temperature range (-25°C ~ 70°C). The M18 threaded cylinder form factor, cable lead termination, and electrical output characteristics are identical. Physical mounting and wiring connections are compatible.

Q: What is the significance of the voltage range difference between these two models?

A: The E2A-M18LS08-WA-B1 5M supports 10V ~ 32V operation, while the E2E-X8B1DL18 5M supports 10V ~ 30V. Applications operating at supply voltages between 30V and 32V require the original E2A model or alternative substitutes supporting the full 32V maximum. Applications operating at 30V or below are unaffected by this specification variance.

Q: What is the significance of the operating temperature range difference?

A: The E2A-M18LS08-WA-B1 5M operates from -40°C to 70°C, while the E2E-X8B1DL18 5M operates from -25°C to 70°C. Applications requiring operation below -25°C must use the original E2A model or seek alternative substitutes with extended low-temperature ratings. Applications operating above -25°C are unaffected by this specification variance.

Q: Are the sensing distance and response frequency identical between these models?

A: Yes. Both models feature 0.315" (8mm) sensing distance and 500Hz response frequency. Detection performance and switching speed are equivalent.

Q: What is the difference between the E2A series and E2E NEXT series?

A: The E2A-M18LS08-WA-B1 5M belongs to the legacy E2A series and is classified as obsolete. The E2E-X8B1DL18 5M belongs to the E2E NEXT series, representing the current generation of Omron inductive proximity sensors. The E2E NEXT series maintains functional compatibility with legacy E2A models while offering active manufacturing support and current product status.

Q: Are both models RoHS compliant?

A: Yes. Both the E2A-M18LS08-WA-B1 5M and E2E-X8B1DL18 5M are RoHS compliant.

Q: What is the packaging difference between these models?

A: The E2A-M18LS08-WA-B1 5M is packaged with standard packaging designation. The E2E-X8B1DL18 5M is packaged in a box. Both models use identical M18 threaded cylinder mechanical packaging for installation purposes.